# How to set up Wireguard + MFA with NSE3000

**URL:** https://community.cambiumnetworks.com/t/how-to-set-up-wireguard-mfa-with-nse3000/108175
**Category:** Next-Gen Firewall
**Created:** [March 9, 2026, 4:26pm UTC](https://community.cambiumnetworks.com/t/how-to-set-up-wireguard-mfa-with-nse3000/108175 "2026-03-09T16:26:32Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Colin\_Bailey](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/c/58956e/32.png) [@Colin\_Bailey](https://community.cambiumnetworks.com/u/Colin_Bailey)
#### Post date: [March 9, 2026, 4:26pm UTC](https://community.cambiumnetworks.com/t/how-to-set-up-wireguard-mfa-with-nse3000/108175/1 "2026-03-09T16:26:32Z")

</div>

Hi

Please can you advise on steps to setup MFA with **WireGuard** vpn

---

<div class="post-metadata">

### Author: ![vijay\_yadav](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/v/a698b9/32.png) [@vijay\_yadav](https://community.cambiumnetworks.com/u/vijay_yadav)
#### Post date: [March 11, 2026, 10:02am UTC](https://community.cambiumnetworks.com/t/how-to-set-up-wireguard-mfa-with-nse3000/108175/2 "2026-03-11T10:02:47Z")

</div>

I’ve written this up as a #knowledge-base article:

> [@WireGuard Two-Factor Authentication Configuration Guide](https://community.cambiumnetworks.com/t/wireguard-two-factor-authentication-configuration-guide/108182):
>
> 1. Enable WireGuard on NSE Log in to the cnMaestro interface. Navigate to the NSE configuration, go to VPN Enable WireGuard on the device, set up the dhcp pool/ 2. Create a User for Authentication Go to the Users section. Add a new user with the following details: Username: Use the user’s email ID. Password: Configure the desired password. This user account will be used for the second authentication step. 3. Add a wireguard client for the user Enable wireguard for…

Pls try and let us know if you have any issue.