Https connection

Bounzz · May 28, 2019, 12:42pm

Hi,

This is possible to have an https connection by default when i click on the IP when the http is disabled ?

cireddy · May 29, 2019, 5:42am

Hi,

At present cnMaestro doen't provide HHTPs access to Device UI from device dash borad. Will discuss internally the scope to address the request / requirment.

dworkman · May 29, 2019, 4:49pm

https access would be very nice to have. There is a posting in the idea section...

https://community.cambiumnetworks.com/t5/Your-Ideas/Give-cnMaestro-the-ability-to-enable-HTTPS-links/idi-p/92366

Thanks

Don

Cambium_Rupam · May 30, 2019, 4:17pm

We will fix in our next release.

Lightnet_Barry · September 13, 2019, 1:26pm

Hi,

Any chance you could make this an optional setting as my SMs are not on https so this feature is a bug...

Kyle_Park · September 26, 2019, 6:10pm

I agree. It's definitely a hassle to have to remove the https when I click on IPs out of cnMaestro.

KR1 · October 9, 2019, 8:03am

Hi Kyle,

Starting 2.3.0 release , cnMaestro reads from the device the web access mode and tries to launch the device GUI accordingly with http/https. So user need not remove https manually from the browser link while launching from cnmaestro if they do not have https enabled in device. This release is planned tentatively for this month end.

Thanks,

KR.

Orlov_Gennadii · December 20, 2019, 2:17am

hi KR,

And where can we get the 2.3.0 release?

There is a 2.2.1-r32 release in the download directory only.

thanks,

Gennadii

KR1 · December 20, 2019, 5:55am

Hi ,

Cloud release of 2.3.0 is available currently. NOC 2.3.0 build will be available in JAN 2020 2nd week mostly.

Regards,

KR.

cireddy · February 11, 2020, 4:17pm

this is been addressed now in 2.3.0 release.

2.3.0 release link on community

http://community.cambiumnetworks.com/t5/cnMaestro/cnMaestro-2-3-0-On-Premises/m-p/114466

Douglas_Generous · February 19, 2020, 1:12am

No cnMaestro does not read the device setting!
Currently none of our epmp hardware has https setup but cnMaestro shortcuts all point to the IP with https. This bug (as I cant choose http over https, it is a bad bug) is not fixed in 2.3.0

If a specific firmware or newer is required, then that should also be stated.

KR1 · February 19, 2020, 6:16am

Hi Douglas,

Are you using On Premises or Cloud version of cnMaestro. The issue is fixed in both the variants. If using cloud please invite krishna.reddum@cambiumnetworks.com to your account so that we can debug the same. If you are using the On Premises version please raise a support ticket so that support team can take a remote session and debug the issue.

Thanks,

KR.