Hello I am configuring 2 ePMP 1000. I put 1 in AP mode and the other in Subscriber mode but when the Subscriber connect to the AP the web page drop me out and i cannot access again to the web of the AP, I tried with a ping to the AP and it response . Any idea to solve this problem?
Maybe you are trying to access AP from WAN(radio side).
There is a special option to allow management access to AP from WAN side. Please go to Configuration->Network and check the "AP Management Access Interface" option. It can be in two states:
LAN Only: Only allow access to the AP’s web management interface via a local Ethernet (LAN) connection. In this configuration, the AP’s web management interface may not be accessed from over the air (i.e. from a device situated below the SM).
LAN and WLAN: Allow access to the AP’s web management interface via a local Ethernet (LAN) connect