ifconfig: what is this.. pls reply

we are now launching our WISP here in our place using the CANOPY products…

this is our problems!

1. we are going to assign a new IP address to the SM… how?
we are using our main router cisco 2600.

how can we assign an IP add to the SM… can u guide us


thanks in advance

After logging into the web interface you can click on IP configuration. Here is where you change the IP address.

You will benefit from downloading and reading through the user guide. There are a lot of useful steps in there for configuring radios. Here is the URL:

http://motorola.canopywireless.com/libr … Fc6B6maqo=

Canopy_Support wrote:
After logging into the web interface you can click on IP configuration. Here is where you change the IP address.

You will benefit from downloading and reading through the user guide. There are a lot of useful steps in there for configuring radios. Here is the URL:

http://motorola.canopywireless.com/libr ... Fc6B6maqo=



sir,

this is what i Mean..

the ISP give us an static ip 203.177.105.1 and how can i use that? i will put that ip to the CANOPY SM web interface?

To restate my response to your other post, ignore the Canopy issues to start and design an IP network that would work within an office using cable and switches. Canopy simply replaces the wire. Canopy links are, in fact, Ethernet switches; they’re self-learning, layer-2, Ethernet bridges.