# Impssible d'acceder a mon antenne cambium force 130

**URL:** https://community.cambiumnetworks.com/t/impssible-dacceder-a-mon-antenne-cambium-force-130/108290
**Category:** ePMP
**Created:** [April 8, 2026, 5:22pm UTC](https://community.cambiumnetworks.com/t/impssible-dacceder-a-mon-antenne-cambium-force-130/108290 "2026-04-08T17:22:14Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![BARRY\_OUMAR](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/b/0ea827/32.png) [@BARRY\_OUMAR](https://community.cambiumnetworks.com/u/BARRY_OUMAR)
#### Post date: [April 8, 2026, 5:22pm UTC](https://community.cambiumnetworks.com/t/impssible-dacceder-a-mon-antenne-cambium-force-130/108290/1 "2026-04-08T17:22:14Z")

</div>

Salut

j’ai perdu la mains de mon antenne cambium force 130 lors d’une mis à jour que j’ai entamer mais suite à une variation du courant je n’arrive plus a l’accéder alors que les voyant sont tous allumé ?

avez-vous une solution svp.

Merci à l’avance pour votre assistance

> I lost control of my Force 130 cambium antenna during an update I started, but due to a power surge, I can no longer access it even though all the indicator lights are on.
> 
> Do you have a solution, please?
> 
> Thank you in advance for your assistance.

Barry Alpha Oumar

Afribone-Guinée

---

<div class="post-metadata">

### Author: ![aka](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/aka/32/31904_2.png) [@aka](https://community.cambiumnetworks.com/u/aka)
#### Post date: [April 9, 2026, 12:47pm UTC](https://community.cambiumnetworks.com/t/impssible-dacceder-a-mon-antenne-cambium-force-130/108290/2 "2026-04-09T12:47:47Z")

</div>

Hello @BARRY_OUMAR,

It appears that the SW image was not flashed successfully due to a power interruption. Please proceed with the recovery by following the guide below

Please don’t hesitate to reach out if you need any assistance.

> [@Recovery of flash corrupted 802.11n-based ePMP devices caused due to power interruption during a software upgrade](https://community.cambiumnetworks.com/t/recovery-of-flash-corrupted-802-11n-based-epmp-devices-caused-due-to-power-interruption-during-a-software-upgrade/45571):
>
> This topic describes the recovery procedure for ePMP1000/F180/F200/F190 devices. For ePMP3000, ePMP3000L, ePMP 3000MP and F300 devices, please see [this newer article](https://community.cambiumnetworks.com/t/epmp-firmware-recovery/66262). Problem Statement: All ePMP radios, except the Connectorized Radios with Sync, have a single flash bank. There is a high probability that the flash bank can get corrupted when power to the radio is interrupted during a flash write, i.e. software upgrade. This is not an issue with the Sync radio since there are two flash banks i…

---

<div class="post-metadata">

### Author: ![BARRY\_OUMAR](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/b/0ea827/32.png) [@BARRY\_OUMAR](https://community.cambiumnetworks.com/u/BARRY_OUMAR)
#### Post date: [April 14, 2026, 6:49am UTC](https://community.cambiumnetworks.com/t/impssible-dacceder-a-mon-antenne-cambium-force-130/108290/3 "2026-04-14T06:49:56Z")

</div>

Oui Bonjour Andrii

Merci pour ton assistance sauf que mon antenne cambium est de F130 !

je vai qu’à meme verifier est je te reviendrais aucours de la journée.

Merci encore