I had to set -50 as target, it’s a Force 180. I also tried -55 but the speed was unstable. At -60 I had less than 1Mbps.
The client is very close to the AP (and also others will be), so I can reach these signals with low power.
I would like to keep -55 or -60 to enable frequency reuse in the opposite direction, but at the moment it’s impossible… Maybe ePMP 2000 will help on this!
I can confirm it’s my second case on locking MCS on about one hundred customers (for now), but I wanted to report my experience since I believe Cambium is listening its customers to make better products!
1 Like