# Link Up, Node Down \[cnWave\]

**URL:** <https://community.cambiumnetworks.com/t/link-up-node-down-cnwave/85149>\
**Category:** cnWave 60 GHz\
**Created:** [April 9, 2022, 6:16pm UTC](https://community.cambiumnetworks.com/t/link-up-node-down-cnwave/85149 "2022-04-09T18:16:07Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Antony](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/a/cab0a1/32.png) [@Antony](https://community.cambiumnetworks.com/u/Antony)\
**Post date:** [August 1, 2023, 10:24am UTC](https://community.cambiumnetworks.com/t/link-up-node-down-cnwave/85149/8 "2023-08-01T10:24:52Z")

</div>

This is the Auto Managed Routes feature:

> [@Auto Manage IPv6 Routes](https://community.cambiumnetworks.com/docs?topic=80946):
>
> The Auto Manage Routes feature adds and manages the IPv6 routes at external E2E Controller. These IPv6 routes are required for routing the IPv6 packets from E2E controller to CNs and DNs. The feature is applicable only when PoP and E2E Controller are in the same subnet. Multi-PoP network In a multi-PoP network, the Auto Manage Routes feature allows to avoid a BGP v6 router under the following conditions: When the Layer 2 bridge is enabled (which implies that the BGP v6 router is not requi…

Whilst this is a cnMaestro X feature, you can still set the routes up in Essentials or using the Onboard controller directly.

---

_[View the full topic](https://community.cambiumnetworks.com/t/link-up-node-down-cnwave/85149)._