Below is the list of SNMP OIDs supported on cnPiolt APs w.r.to 3.2.1-r6 image
Note that MIB files with descriptions can also be downloaded from the support site for every firmware release (https://support.cambiumnetworks.com/files/e400/)
Cambium Access Point Table (Contains all the details about the AP)
cambiumAPName | Access Point host name |
cambiumAPIPAddress | Access Point IP Address |
cambiumAPSerialNum | Access Point Serial Number |
cambiumAPModel | Access Point Model Name |
cambiumAPCPUUtilization | Access Point CPU Utilization |
cambiumAPMemoryFree | Amount of memory free in the access point in bytes |
cambiumAPSWVersion | Access Point Software Version |
cambiumAPUptime | Access Point uptime |
cambiumAPHWType | Access Point Hardware Type |
cambiumAPRegulatory | Access Point Regulatory detail |
cambiumAPCnmConstaus | Access Point cnMaestro Connection Status |
cambiumAPCnmAccID | Access Point cnMaestro Account ID |
cambiumAPTotalClients | Total clients connected with this Access Point |
cambiumRadioTable ( This table contains all radios of access point)
cambiumRadioIndex | Radio number |
cambiumRadioMACAddress | Radio MAC Address |
cambiumRadioBandType | Radio band type |
cambiumRadioBandType | Radio band type |
cambiumRadioWlan | Radio WLAN number |
cambiumRadioNumClients | Number of clients connected with a radio |
cambiumRadioChannel | Radio channel |
cambiumRadioChannelWidth | Radio channel width |
cambiumRadioTransmitPower | Radio Power |
cambiumRadioTotalTxPackets | Total packets transmitted by a radio |
cambiumRadioTotalRxPackets | Total packets received by a radio |
cambiumRadioTxDataBytes | Transmitted data packets in bytes by a radio |
cambiumRadioRxDataBytes | Received data packets in bytes by a radio |
cambiumRadioState | Radio state (ON/OFF) |
cambiumRadioDfsStatus | DFS status |
cambiumRadioDfsDetect |
DFS detected by a radio |
cambiumClientTable This table contain information about all clients connected to the access point
cambiumClientMACAddressIndex | The auxiliary variable used to identify instances of the columnar objects in the Client Table. |
cambiumClientMACAddress | Client MAC address |
cambiumClientIPAddress | Client IP Address |
cambiumClientName | Name of user using the client |
cambiumClientSsid | Client is connected with SSID |
cambiumClientVendorName | Client operating system |
cambiumClientHwmode | Client hardware mode |
cambiumClientRadioIndex | Client is connected with radio |
cambiumClientWlan | Client wlan number |
cambiumClientVlan | Client Vlan number |
cambiumClientSNR | Signal to noise ratio of client connection to the access point |
cambiumClientTxRate | Transmit rate of client in mbps |
cambiumClientTotalTxPackets | Total packets transmitted by the client |
cambiumClientTxDataBytes | Total bytes transmitted by the client |
cambiumClientTotalRxPackets | Total packets received by the client |
cambiumClientRxDataBytes |
Total bytes received by the client |
cambiumWlanTable This table contain information about all WLAN configured on the access point
cambiumWlanIndex | The auxiliary variable used to identify instances of the columnar objects in the Wlan Table. |
cambiumWlanSsid | Wlan SSID |
cambiumWlanBand | Radio band configuration on Wlan |
cambiumWlanVlan | Wlan vlan number |
cambiumWlanSecurity | Security configuration on Wlan |
cambiumWlanGuestAccess | Guest Access configuration on Wlan |
cambiumWlanNumClients | Number of clients connected to Wlan |
cambiumWlanTxDataBytes | Total bytes transmitted |
cambiumWlanTotalRxPackets | Total packets received |
cambiumWlanRxDataBytes | Total bytes received |