Mark all frequencies and bandwith


I am changing some APs Medusa from 20 Mhz of Bandwith to 30 Mhz, each AP may be have roughly 120 SMs registered, I have to mark every 30 mhz option or box in each SM, Is there a way for mark the box or option of 30 Mhz and frequencies in all of SMs with cnMaestro or cnut?


With cnMaestro, you can create a template to configure the SM's.  Attached is the .json file to use.  It has 20 and 30 MHz, if you want others you will need to add them.  The file will remove any other selected bandwidths.

1 Like