Hi, wi have a problem with signal level, in monitor wireless, from SMs to ePMP4500 APs.
In scanning mode the SMs shows a weak signal, not real, and it’s register to others APs (we have same ssid on tower). Forcing SM to ePMP4500 AP and registered, the signal it’s good.
With this problem we don’t have a balancing for number of SM between the APs.
FW 5.10 on AP e CPE, same problem with all types of SM and we are experiencing this problem on many towers, different frequencies, so this is not an hardware or single device issue.
Thanks
In attacchment a monitor wireless before and after forcin SM to register on 4500.
1 Like