# My CPE can not attach to the access point on my BTS.

**URL:** https://community.cambiumnetworks.com/t/my-cpe-can-not-attach-to-the-access-point-on-my-bts/56563
**Category:** ePMP
**Created:** [June 20, 2018, 12:30pm UTC](https://community.cambiumnetworks.com/t/my-cpe-can-not-attach-to-the-access-point-on-my-bts/56563 "2018-06-20T12:30:41Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![Luis](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/l/3e96dc/32.png) [@Luis](https://community.cambiumnetworks.com/u/Luis)
#### Post date: [June 20, 2018, 8:23pm UTC](https://community.cambiumnetworks.com/t/my-cpe-can-not-attach-to-the-access-point-on-my-bts/56563/3 "2018-06-20T20:23:01Z")

</div>

Hello,

Anything displayed by the SM at the Monitor-\>Wireless page? It should be listing the APs that it is able to see during the scanning and, if it cannot register with the AP, it should display a reason why.

[https://community.cambiumnetworks.com/t5/ePMP-Troubleshooting/Network-Entry-State-Definitions-and-Courses-of-Action/td-p/40712](https://community.cambiumnetworks.com/t/network-entry-state-definitions-and-courses-of-action/40551)

---

_[View the full topic](https://community.cambiumnetworks.com/t/my-cpe-can-not-attach-to-the-access-point-on-my-bts/56563)._