Wow, Just WOW.. -11799873.4 dBm and still 26/16 over the noise. Anyone ever seen this before?
I've never seen this before. What firmware are you running?
Check your transmit power settings under Configuration/Radio/Power Control, along with the firmware, what version is AP running compared to Subscriber Module, does your configuration file have a setting for transmit power? If you see your transmit power is set to 14657402. Is it possible the configuration file used could be altered or corrupt? Let me know if any of this helps!
MSIMax,
Thanks for posting this. I too am curious what firmware you are running. Also is still present if you disable the Canopy GUI Enhancer that it appears you are running on your browser?
Charlie
The radio was running 16.1.1.1 (STA) firmware at the time. Sorry, I would like to try your suggestions, but one of the field technicians ran out the day I posted this and swapped to a 450b. It was a business connection that started to have issues, so there wasnt much time to troubleshoot further with it
@MSImax wrote:The radio was running 16.1.1.1 (STA) firmware at the time. Sorry, I would like to try your suggestions, but one of the field technicians ran out the day I posted this and swapped to a 450b. It was a business connection that started to have issues, so there wasnt much time to troubleshoot further with it
The next time you see this if it is still a problem with the GUI enhancer disabled, you would grab a http://<IP>/engineering.cgi and send it to me I would love to take a look.
Will do