PMP450 How can we possibly limit the CIR from the Subscriber Module side?

By default, CIR high priority data channels are not enabled on the SM. To set a CIR high priority data channel, login to the radio's management, go to the configuration area, and click on the Quality of Service (QoS) tab. Assuming your using firmware 15.2 or higher, select '2' for the number of data channels and press save. You'll now notice that you can enter in kbps values for the high priority downlink and uplink CIR. Enter in the desired values, press save, and then you'll need to reboot the SM for the changes to take effect.

1 Like