Port Forwarding using cnPilot R201

Hi there,

I’m using a cnPilot R201 with firmware 4.7.1-R4. In cnMaestro I cannot find any option for port forwarding. There are information for firmware 4.5. I’ve updated my device to this firmware version. The option which is described in the manual is missing.
What I have to do to activate UPD port forwarding?

Best wishes
Georg

Hi Georg,

You can use Template from cnMaestro to push Portforward configuration to Device. Create a template in this format:

dhcpStatic1=e0:69:95:69:72:28;192.168.11.222
dhcpStatic2=9c:eb:e8:2b:66:0d;192.168.11.35
PortForwardRules=192.168.11.222,8000,8900,TCP&UDP,TCP_UDP_Rule;192.168.11.35,9000,10000,UDP,Only_UDP_Rule
DBID_RANDOM_NUM=23458

Template:

Device Configuration:
Once Configuartion is pushed from cnMaestro , device gets configured as shown below.

4 Likes

Thank you very much, this suggestion was helping!

2 Likes