problem with RF Public Network Interface Configuration

Products PMP
1

Good Morning Forum,
>
My problem is when i enable RF Public Network Interface Cofiguration at
some SM my clients cant surfweb but others doesnt have this problem.
Some times when i enable RF public,not inmediatly i have ping to SM
,some time i have to wait 30 or 60 minutes to i have ping to that SM,but 2 hours late my client call me ,he says i cant surfweb,but i have ping with your RF Public and i can into to SM page .

Inmediatly I disable RF public ,my client has surfweb,but i cant make ping to SM.

Is rare ,i am very confuse.

This is my network configuration i have aprox 50 SMs

I have nat at each sm ,dhcp server enable,dhcp client disable.

Router Cisco 1841: 192.168.1.1
AP1: 192.168.1.2
AP2: 192.168.1.3
AP3: 192.168.1.4
AP4: 192.168.1.5
BHM: 192.168.1.6
BHS: 192.168.1.7



>NAT PUBLIC SM1:192.168.1.15 RF PUBLIC 192.168.1.168
>NAT PUBLIC SM2:192.168.1.16 RF PUBLIC 192.168.1.169
> . .
> . .
> . .
>NAT PUBLIC SM9:192.168.1.159 RF PUBLIC 192.168.1.177
>
>
> The nat each client is subnet 192.168.3.1
>
> Like this SM:
>
> IP Address 192.168.3.1
> Subnet Mask 255.255.255.0
> DMZ Host Interface Configuration
> IP Address 192.168.3.10 Disable
> NAT Public Network Interface Configuration
> IP Address 192.168.1.159
> Subnet Mask 255.255.255.0
> Gateway IP Address 192.168.1.1
> DHCP Server Network Interface Configuration
> DHCP Server Start IP Address 192.168.3.2
> Number of IP’s to Lease 50
> RF Public Network Interface Configuration
> IP Address 192.168.1.177 Enable
> Subnet Mask 255.255.255.0
> Gateway IP Address 192.168.1.1
>
>
>
> I hope you understand my problem and you can help me.
>
> Very Thanks Forum,and have a good day.

2

Download the Canopy NAT configuration from here and compare it your your setup.

http://aircloud.com.googlepages.com/canopydocumentation

3

Carlos, I am in Cali, you can send me a private message or give me a call, my phone number is on our website.
I will try to give you some advice on the configuration ot your Canoy Equipment.

4

create a secondary IP address on the cisco router 172.16.0.0 network adn then move all teh RF addresses to teh 172.16.0.0. network.