To all,
We are happy to announce PTP820 Release 9.0 is available at:
https://support.cambiumnetworks.com/files/ptp820/
New features included in Release 9.0:
PTP820C and PTP820S
-
Advanced Frequency Reuse (AFR)
- AFR enables operators to reduce the angular separation requirement between links at the same frequency channel and the same polarization from the currently required 90-120° range to angular separation as low as 10-40°. This enables operators to deploy an additional adjacent link at the same frequency spot, thereby simplifying network deployment.
-
SyncE with SSM/ESMC
- PTP 820C and PTP 820S support SyncE for all interfaces, along with SSM/ESMC messages
-
Configurable ETSI/ANSI Mode
- PTP 820C and PTP 820S users can change from the default (ETSI) mode to ANSI mode. Changing the ETSI/ANSI mode does not require unit reset.
-
Mate Management Access (IP Forwarding) for XPIC
- For 4x4 MIMO and 2+2 XPIC configurations using an external switch operating in LAG mode, Mate Management Access enables users to manage both units via in-band management. When Mate Management Access is enabled, the two units exchange incoming management packets, ensuring that all management data is received by both units.
-
1731 Connectivity Fault Management (CFM) Enhancements
- Provides the following enhancements to PTP 820 Y.1731 fault management capabilities:
- Explicit MIP – Adds a MIP-creation option on the MEG level. When Explicit MIP is selected, MIPs are created on the service points of the MEG when a lower-level MEP exists on the service point. This option is usually used when the operator’s domain is encompassed by another domain.
- Primary VLAN – Enables users to configure, via the service point, a VLAN, S-VLAN, or C-VLAN for MEPs that reside on that service point. Each MEP inherits the same VLAN, C-VLAN, or S-VLAN configuration as the service point on which it resides
- ATPC Override Timer with Unit Protection
- Configurable FTP/SFTP Port
- Egress CoS Statistics in Web EMS
- Asymmetrical Maximum Profile
- Provides the following enhancements to PTP 820 Y.1731 fault management capabilities:
PTP820G
- 1731 Connectivity Fault Management (CFM) Enhancements
- ATPC Override Timer with Unit Protection
- Configurable FTP/SFTP Port
- Egress CoS Statistics in Web EMS
- Asymmetrical Maximum Profile
For more details, please refer to Release notes and product technical description documents.