Public Wi-Fi Hotspot billing

[GaryHansen]

Hi Timothy, these references should provide the information that you are looking for.

Configuring Dynamic Authorization(CoA) on cnPilot E-series Device for Guest enabled SSID

The RADIUS Change of Authorization (CoA) feature provides a mechanism to change the attributes of an authentication, authorization, and accounting (AAA) session after it is authenticated. Administrator can send CoA packets from the AAA server. For example using “radclient” tool administrator can send CoA packet from Freeradius AAA server. By default, CoA supports 3799 port. Configuration Goto “Configure >> WLAN >> Radius Server” and Enable Dynamic Authorization. [CoA_image.JPG] Dynamic Auth…

How do I rate-limit my wireless client traffic?

There are three levels of rate-limiting that is supported on the ePMP1000-Hotspot, E400 and E500 access points: 1. The traffic from/to each client on a SSID can be rate-limited in either direction by configuring usage-limits inside the WLAN Configuration. This is useful in deployments like public hotspots where the backhaul is limited and the network administrator would like to ensure that one client does not monopolize all available bandwidth. 2. All upstream/downstream traffic on an SSID (ag…

The WISPr attributes for this (defined in RADIUS dictionary files, and subsequently for the users policy) are:

VENDOR WISPr 14122

ATTRIBUTE WISPr-Bandwidth-Max-Up 7 integer
ATTRIBUTE WISPr-Bandwidth-Max-Down 8 integer