How do you set QOS to allow VOIP traffic priority?? Using 5.7 Canopy
Thanks for help…
The equipment behind the sm must be setup or able to flag the packets as QOS to the right bit in the diffserv configuration. For example in our sipura ata’s we flag them as 0x30 and 0x38 which are setup by default in the sm’s
All backhauls must have the high priority turned on as well as in the SM if the are advantage sm
Just to let you know CodePoint 56 is reserved for VoiP and the Priority is by default: 7. There are certain CodePoint priorities that you can not change. I believe that is one of them.
You must use firmware 7.3.6… in 7.2.9 didn´t work…