# R195w repeater mode **URL:** https://community.cambiumnetworks.com/t/r195w-repeater-mode/66803 **Category:** Residential Wi-Fi **Created:** [May 22, 2020, 4:32pm UTC](https://community.cambiumnetworks.com/t/r195w-repeater-mode/66803 "2020-05-22T16:32:21Z") **Posts on this page:** 1 **Showing post:** 4
### Author: ![Nilesh22](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/nilesh22/32/11759_2.png) [@Nilesh22](https://community.cambiumnetworks.com/u/Nilesh22) #### Post date: [May 23, 2020, 11:59am UTC](https://community.cambiumnetworks.com/t/r195w-repeater-mode/66803/4 "2020-05-23T11:59:20Z")
Hi , Even if you have configured repeater on 5GHz, you still will be able to connect clients to it . If you have configured Repeater WAN in bridge mode , you will get IP from Base AP . Better to disable DHCP on Repeater . If you have Repeater WAN in NAT mode , you will need to keep running DHCP on repeater , but change default IP pool on Repeater from 192.168.11.0/24 to something else . Below are few article to help you with configuration . [http://community.cambiumnetworks.com/t5/cnPilot-R-Series-Home-Small/Configuring-cnPilot-R201-R200-as-Range-Extender-Wi-Fi-Repeater/m-p/54900#M18](https://community.cambiumnetworks.com/t/configuring-cnpilot-r201-r200-as-range-extender-wi-fi-repeater/45654) [http://community.cambiumnetworks.com/t5/cnPilot-R-Series-Home-Small/Wi-Fi-Range-Extender-between-cnPilot-R-and-E-Series-Access-Point/m-p/73717#M30](https://community.cambiumnetworks.com/t/wi-fi-range-extender-between-cnpilot-r-and-e-series-access-point/51423) --\> You can use Both Base AP and repeater as R-series. This one coveres both bridge mode and NAT mode . Just Ignore E-series configuration . Regards, Nilesh --- _[View the full topic](https://community.cambiumnetworks.com/t/r195w-repeater-mode/66803)._