# R201P - Web Access Protocol Selection

**URL:** https://community.cambiumnetworks.com/t/r201p-web-access-protocol-selection/106683
**Category:** Residential Wi-Fi
**Created:** [August 14, 2025, 7:34pm UTC](https://community.cambiumnetworks.com/t/r201p-web-access-protocol-selection/106683 "2025-08-14T19:34:32Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Danny\_Ray\_Boyer](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/d/c5a1d2/32.png) [@Danny\_Ray\_Boyer](https://community.cambiumnetworks.com/u/Danny_Ray_Boyer)
#### Post date: [August 14, 2025, 7:34pm UTC](https://community.cambiumnetworks.com/t/r201p-web-access-protocol-selection/106683/1 "2025-08-14T19:34:32Z")

</div>

With the latest Firmware Version installed - 4.8.1-R4(202301111440) - how can one disable HTTP access on the Web Access Protocol Interface selection box, to allow the router to be accessed by HTTPS?

With the latest firmware , there are only two options to select as Web Access Protocol: HTTP and HTTPS.

With earlier firmware, you used to be able to select HTTP, HTTPS or both, as I recall.

---

<div class="post-metadata">

### Author: ![Jaiprakash\_G](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/j/6bbea6/32.png) [@Jaiprakash\_G](https://community.cambiumnetworks.com/u/Jaiprakash_G)
#### Post date: [August 19, 2025, 9:38am UTC](https://community.cambiumnetworks.com/t/r201p-web-access-protocol-selection/106683/2 "2025-08-19T09:38:30Z")

</div>

@Danny_Ray_Boyer

Use this in the AP-Group’s User-Defined overrides. This will allow only HTTPS or only HTTP access to the device.

> way\_access\_web=https

or

> way\_access\_web=http