Re-Reg Count

Site Name : Noble Resources - Panjang
Software Version : CANOPY 7.3.6 Oct 24 2005 12:06:56
Software Boot Version : CANOPYBOOT 3.0
FPGA Version : 020205 (DES) P9
Session Timeout: 22, AirDelay 260 (approximately 2.41 miles (12740 feet))
Session Count: 89, Reg Count 22, Re-Reg Count 67
RSSI (Avg/Last): 510/474 Jitter (Avg/Last): 3/3 Power Level (Avg/Last): -74/-74
DnRate(SM): 256 DnLimit(SM): 512 UpRate(SM): 256 UpLimit(SM): 512 (kbit)

Problem is Re-Reg Count 67

its to much big and the conection will always reboot

so what should i do?

Re-Reg Count
This field displays how many registration request messages the AP has received from the SM that is already in session. If the number of these messages is far greater than the number from other SMs that are both registered to the AP and in session, then this SM may have an installation problem.

This will be probably due to interference at the SM side. Check the RF stats at the SM - if you see high count in the Out of Range Up Sched field, this is the case.

Use the AP Eval data or Spectrum analyzer to see if there is a free channel.