Run a Spectrum Analysis from the AP?

Is there a way to run a Spectrum Analysis from the AP to help indicate if the AP is seeing interference. The SM’s connected to this AP have lower jitter but the Jitter on the AP side is high (20 SM’s connected, 3 SM’s below 7, the rest are 7 to 13).

Thanks,
Ken

On what model of equipment?

On PMP320 there is a Spectrum Analyzer mode. It just spits out numbers so you have to put them into Excel or something for a nice graph.

In PMP100 you must change the AP to SM mode to run a spectrum analysis.