Scan locking in on wrong freq

I had an interesting experience last week with a 2.4 module. It is about a block away from the ap, a 360deg cyclone. When it booted up the rssi was over 2000 but the jitter was 12! Rebooting was no help. I finally looked at the ap eval screen and noticed that it said my ap was on 24300. I remembered that I had set the ap to 24325. I unchecked 24300 in the sm and rebooted and the unit came up on 24325 with a jitter of 1.
With this I learned that the ap eval doesn’t relly querry the ap for frequency, but shows the channel the sm has locked onto. It is the only place I can find where you can see what frequency the sm is on.