Setup of wireless link between ePMP3000 and ePMP Force 300-25

Hi,

I have recently purchased an ePMP3000 and an ePMP 5GHz Force 300-25.

I would like to set up a link between them capable of streaming CCTV.

Are there configuration manuals that would apply to this setup? 

If not, any tips and tricks would be appreciated.

Thanks,

Tom.

Hi TomS,

Please refer to the following video:

https://www.youtube.com/watch?v=SViiRW5BI90

Although it is pretty old it still explain the basics. For the CCTV you would probably want to setup 30/70  downlink-to-uplink ratio to have more throughput in the uplink. Other than that it should be pretty straightforward.

Dmitry

Thanks Dmitry, I'll give it a go!

Hi Dmitry,

Thanks for the link, it was quite simple to setup.

I am just wondering what the cable limitations are for the ePMP3000.

What is the maximum allowable distance between the PoE and ePMP3000 unit?

Thanks,

Tom

Hi,

Maximum cable length for Ethernet is 328 feet(100 meters). Power supply was also build with the voltage drop of the 100 meters cable maximum length in mind.

Thanks,

Dmitry