# show lldb-neighbors - Empty

**URL:** <https://community.cambiumnetworks.com/t/show-lldb-neighbors-empty/47223>\
**Category:** ePMP\
**Created:** [September 10, 2016, 1:07am UTC](https://community.cambiumnetworks.com/t/show-lldb-neighbors-empty/47223 "2016-09-10T01:07:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ademirpeixoto](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/a/919ad9/32.png) [@ademirpeixoto](https://community.cambiumnetworks.com/u/ademirpeixoto)\
**Post date:** [September 10, 2016, 1:07am UTC](https://community.cambiumnetworks.com/t/show-lldb-neighbors-empty/47223/1 "2016-09-10T01:07:02Z")

</div>

Hi,&nbsp;

&nbsp; &nbsp; When I acivate the LLDP in mode Transmit and Receive on SM and in the ePMP 1000 Sync AP nothing shows.  
&nbsp; &nbsp;  
ePMP1000\_c2f3b5\>show lldp-neighbors  
-------------------------------------------------------------------------------  
LLDP neighbors:  
-------------------------------------------------------------------------------  
  
&nbsp; &nbsp;By the way. When Cambium will use CDP or somthing compatible with Cisco/UBNT/Mikrotik discover ?  
  
  
Regards,  
  
Ademir Peixoto .'.

---

<div class="post-metadata">

**Author:** ![Artem\_Grabenko](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/artem_grabenko/32/11547_2.png) [@Artem\_Grabenko](https://community.cambiumnetworks.com/u/Artem_Grabenko)\
**Post date:** [September 12, 2016, 10:59am UTC](https://community.cambiumnetworks.com/t/show-lldb-neighbors-empty/47223/2 "2016-09-12T10:59:17Z")

</div>

Hi ademirpeixoto,

Can you please provide remote access to your ePMP devices? If no, can you please check next:

Can you tell which firmware version are you using on your ePMP devices?

And what devices are connected to your ePMP AP/SM LAN side?

Do you see received LLDP messages from ePMP on your LAN devices?

Thank you,

Artem.

---

<div class="post-metadata">

**Author:** ![ademirpeixoto](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/a/919ad9/32.png) [@ademirpeixoto](https://community.cambiumnetworks.com/u/ademirpeixoto)\
**Post date:** [September 12, 2016, 5:21pm UTC](https://community.cambiumnetworks.com/t/show-lldb-neighbors-empty/47223/3 "2016-09-12T17:21:51Z")

</div>

Hi&nbsp;Artem,

&nbsp; &nbsp;They don't works on wlan side too ?

&nbsp; &nbsp; All versions are 3.0.

&nbsp; &nbsp; The operate in public and fixed ips. &nbsp;How can I send you the credentials ?

&nbsp; &nbsp; Regards,

&nbsp; &nbsp; Ademir Peixoto .'.

---

<div class="post-metadata">

**Author:** ![Artem\_Grabenko](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/artem_grabenko/32/11547_2.png) [@Artem\_Grabenko](https://community.cambiumnetworks.com/u/Artem_Grabenko)\
**Post date:** [September 13, 2016, 10:36am UTC](https://community.cambiumnetworks.com/t/show-lldb-neighbors-empty/47223/4 "2016-09-13T10:36:24Z")

</div>

Hi&nbsp;ademirpeixoto,

LLDP on ePMP 1000 and ePMP 2000 devices is supported only on Ethernet/LAN side. So if LLDP is turned on, than ePMP device will&nbsp;advertise itself to&nbsp;Ethernet/LAN connected devices, and receive&nbsp;LLDP messages from&nbsp;Ethernet/LAN devices.

If you still observe issues with LLDP, you can contact me with private message on forum, or on email&nbsp;[artem.grabenko@cambiumnetworks.com](mailto:artem.grabenko@cambiumnetworks.com)&nbsp;and we will negotiate remote session.

Thank you,

Artem.