Slow Dial Out

Product Name cnPilot R200P  
 
 
Hardware Version V1.3 
Loader Version V3.30(Oct 28 2016 14:51:31) 
Firmware Version 4.3.1-R1(201612201723) 
Device-Agent Version 2.66 
 
SInce we have done this firmware update the dialout seems to take 5-10seconds longer to connect a call then before.
Please advise.
 
Thanks,

@NOW wrote:
Product Name cnPilot R200P  
 
 
Hardware Version V1.3 
Loader Version V3.30(Oct 28 2016 14:51:31) 
Firmware Version 4.3.1-R1(201612201723) 
Device-Agent Version 2.66 
 
SInce we have done this firmware update the dialout seems to take 5-10seconds longer to connect a call then before.
Please advise.
 
Thanks,

Could you please send us logs & config from the AP, to support@cambiumnetworks.com?

Also, what was the previous device firmware?  Any other changes (network settings, SIP server etc), or just after the firmwrae upgrade you see the extra time on the dial-out?

thanks

thanks

Could you please send us logs & config from the AP, to support@cambiumnetworks.com?

Sent

Also, what was the previous device firmware?  

Cant remember I deleted my note after we did the update but from what I can put together it would have been what was available in Sept 2016

Any other changes (network settings, SIP server etc), or just after the firmware upgrade you see the extra time on the dial-out? After the update I had to change the Ring Voltage(40-63 Vrms) on line to ring a bell setup and Impedance Matching