SNMP for Adding Secondary Color Codes

Looking at automated way to add secondary color codes with SNMP.

https://support.cambiumnetworks.com/framed/onlinetools/content.WHISP-SM-MIB.html#colorCode2

This lists just 2 through 10. Is that accurate? After adding color codes with web GUI I try to read and get an error there.

SNMPv2-SMI::enterprises.161.19.3.2.1.114 = No Such Instance currently exists at this OID

This is a 3.6 SM on 16.2.1

I found this.

snmpbulkget -v2c -c Canopy -m ALL 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.9
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.1 = INTEGER: 90
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.2 = INTEGER: 91
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.3 = INTEGER: 92
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.4 = INTEGER: 93
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.5 = INTEGER: 94
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.6 = INTEGER: 96
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.7 = INTEGER: 97
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.8 = INTEGER: 98
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.9 = INTEGER: 99
SNMPv2-SMI::enterprises.161.19.3.2.9.1.1.10 = INTEGER: 100

This lists them. How do I add them all as secondary with SNMP?

Looking here and not finding anything.
https://support.cambiumnetworks.com/framed/onlinetools/content.WHISP-SM-MIB.html