# Throughput and Test mode

**URL:** <https://community.cambiumnetworks.com/t/throughput-and-test-mode/45607>\
**Category:** ePMP\
**Created:** [May 25, 2016, 1:44am UTC](https://community.cambiumnetworks.com/t/throughput-and-test-mode/45607 "2016-05-25T01:44:00Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Deepesh\_Sharma](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/d/ecae2f/32.png) [@Deepesh\_Sharma](https://community.cambiumnetworks.com/u/Deepesh_Sharma)\
**Post date:** [May 25, 2016, 7:52am UTC](https://community.cambiumnetworks.com/t/throughput-and-test-mode/45607/2 "2016-05-25T07:52:55Z")

</div>

I would recommend below mentioned points before start troubleshooting for any PTP/PMP/ePMP throughput or low RSSI or Low modulation issue.These points are applicable everywhere in whole wireless universe :-

**The Distance/Noise/Alignment/Bad configuration-----** could affect **---------\>Modulation/RSSI-----** if these low then **------\>Throughput---------\>will be low for sure.**

**The best way implement or plan even before buying the products------\>Plan the link on Capacity Planner for ePMP/PMP and Link Planner for PMP/PTP.These tools are available on our website.**

**For Link Planner&nbsp;[click here.](http://www.cambiumnetworks.com/products/software-tools/)**

**For Capacity Planner&nbsp;[click here.](https://support.cambiumnetworks.com/files/epmp/#r3)**

**Then feel the magic of these very advance and highly professional tools.**

Hope this will help in future during troubleshooting and understanding the co-relations between all above aspects.

---

_[View the full topic](https://community.cambiumnetworks.com/t/throughput-and-test-mode/45607)._