# UGPS Installation GPS status and location data readout **URL:** https://community.cambiumnetworks.com/t/ugps-installation-gps-status-and-location-data-readout/58771 **Category:** CMM5 **Tags:** knowledge-base **Created:** [November 9, 2018, 11:54pm UTC](https://community.cambiumnetworks.com/t/ugps-installation-gps-status-and-location-data-readout/58771 "2018-11-09T23:54:47Z") **Posts on this page:** 1 **Page:** 1
### Author: ![JBoeldt](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/jboeldt/32/11758_2.png) [@JBoeldt](https://community.cambiumnetworks.com/u/JBoeldt) #### Post date: [November 9, 2018, 11:54pm UTC](https://community.cambiumnetworks.com/t/ugps-installation-gps-status-and-location-data-readout/58771/1 "2018-11-09T23:54:47Z")
**The uGPS is no longer shipping as of December 2018.  It has been replaced with cnPulse.  Refer to the cnPulse knowledge base for more information.** The UGPS provides location data to connected synchronized devices and may be retrieved by the access point/backhaul/cluster management module web GUI or by SNMP.  GPS status and location data readout is currently available on PMP 100/320/400/430, and PTP 100/200/230, series radios. ### Retrieving GPS Status and Location Data via Radio Web Management GUI #### PMP 100/400/430 and PTP 100/200/230 Series | **Step** | **Action** | | 1 | With the UGPS powered and connected to the radio, navigate to **Home** \> **GPS Status**. | | 2 | GPS Location Data is displayed in section **GPS Status**. PMP 430 Example ![GPS status and location data - PMP 430.png](https://d1okf4ta8xniw3.cloudfront.net/original/2X/d/db1056240c22777bef295dbb00f2c54570c67787.png "GPS status and location data - PMP 430.png") | ### Retrieving GPS status and location data via SNMP To retrieve GPS Status and Location Data via SNMP (Simple Network Management Protocol) from synchronized devices operators may use the following procedures.  | **Step** | **Action** | | 1 | With the UGPS powered and connected to the radio, on the radio web management GUI navigate to **Configuration** \> **SNMP**. | | 2 | Verify that the **Community String** and **Accessing Subnet** values are set as desired. | | 3 | Perform a “snmpget” command for the OID desired. | Object Name, OID | Description | | whispGPSStatus, .1.3.6.1.4.1.161.19.3.1.3.1 | GPS synchronization info  (1: GPS Synchronized, 2: GPS Lost Sync, 3: Generating Sync) | | gpsSyncSource, .1.3.6.1.4.1.161.19.3.1.3.2 | Source of GPS sync pulse | | gpsSyncStatus, .1.3.6.1.4.1.161.19.3.1.3.3 | Current GPS sync status | | gpsTrackingMode, .1.3.6.1.4.1.161.19.3.1.3.4 | GPS tracking mode | | gpsTime, .1.3.6.1.4.1.161.19.3.1.3.5 | GPS time | | gpsDate, .1.3.6.1.4.1.161.19.3.1.3.6 | GPS date | | gpsSatellitesTracked, .1.3.6.1.4.1.161.19.3.1.3.7 | Current number of satellites GPS is tracking | | gpsSatellitesVisible, .1.3.6.1.4.1.161.19.3.1.3.8 | Number of satellites visible to the GPS | | gpsHeight, .1.3.6.1.4.1.161.19.3.1.3.9 | GPS height | | gpsLatitude, .1.3.6.1.4.1.161.19.3.1.3.11 | GPS latitude | | gpsLongitude, .1.3.6.1.4.1.161.19.3.1.3.12 | GPS Longitude | |