uGPS

Products PMP
#1

With pmp 450i recieving sync on ugps timing port, should the gps reciever information display only "Aquiring GPS Information..."?  This is with the 29.5 v supply powering ugps

With the 450i powering ugps direct via aux port, the gps reciever information including invalid counts etc was displayed.

Thanks

#2

Hi Hewey, 

This is a known defect that we have to address. 

Thanks,

Sriram

#3

Thanks for the reply....so is my sync good or is it just a display issue?

#4

Display Issue!

We are seeing the same down this way mate.

BMS Network Solutions

1 Like
#5

Ok thanks!

#6

We are using the UGPS on our 450i 900mhz 15.0.2

I attached a screen for shot for a looksy