# UPLINK for cnMatrix EX2010-P via 1000BASE-T

**URL:** <https://community.cambiumnetworks.com/t/uplink-for-cnmatrix-ex2010-p-via-1000base-t/65508>\
**Category:** cnMatrix\
**Created:** [February 24, 2020, 1:25pm UTC](https://community.cambiumnetworks.com/t/uplink-for-cnmatrix-ex2010-p-via-1000base-t/65508 "2020-02-24T13:25:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![PG1](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/p/ac8455/32.png) [@PG1](https://community.cambiumnetworks.com/u/PG1)\
**Post date:** [February 24, 2020, 1:25pm UTC](https://community.cambiumnetworks.com/t/uplink-for-cnmatrix-ex2010-p-via-1000base-t/65508/1 "2020-02-24T13:25:38Z")

</div>

Hi

I will run uplink for&nbsp;cnMatrix EX2010-P from HP switch port 1Gbps 1000BASE-T

can I use RJ45 cable&nbsp;1000BASE-T for&nbsp;UPLINK of cnMatrix EX2010-P ?

Or I have to buy SFP transmitter for EX2010-P ?

+ if I can use uplink for the EX2010-P standard what RJ45 port, what is needed to configure?

Thanks

PG

---

<div class="post-metadata">

**Author:** ![TamN](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/t/f17d59/32.png) [@TamN](https://community.cambiumnetworks.com/u/TamN)\
**Post date:** [February 24, 2020, 1:34pm UTC](https://community.cambiumnetworks.com/t/uplink-for-cnmatrix-ex2010-p-via-1000base-t/65508/2 "2020-02-24T13:34:03Z")

</div>

Hi,

Yes, you can connect port 1-8 of 2010-P to HP switch using RJ45 cable 1000BASE-T. You can also get a copper-SFP transceiver to connect SFP port 9 or 10 of 2010-P to HP switch using RJ45. You don't need to do any configuration in order to use the RJ45.

Regards.