# Upload rssi

**URL:** <https://community.cambiumnetworks.com/t/upload-rssi/109153>\
**Category:** ePMP\
**Created:** [November 3, 2026, 4:58am UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153 "2026-11-03T04:58:23Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jane\_Katassi](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/jane_katassi/32/32670_2.png) [@Jane\_Katassi](https://community.cambiumnetworks.com/u/Jane_Katassi)\
**Post date:** [November 3, 2026, 4:58am UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/1 "2026-11-03T04:58:23Z")

</div>

Hello everyone just asking what could affect my upload rssi

 ![Screenshot_20261103-075624](https://d1okf4ta8xniw3.cloudfront.net/original/3X/3/7/372146d60f687ca7c6a9b6073d62a6bf0c2552b9.jpeg)

 ![Screenshot_20261103-075658](https://d1okf4ta8xniw3.cloudfront.net/original/3X/3/b/3b7a9210405b1f34f353c1aac6099aca9e77db6f.jpeg)

 ![Screenshot_20261103-075710](https://d1okf4ta8xniw3.cloudfront.net/original/3X/9/f/9f1d29bbdd64407a9a5fdba2a2dd84c8beb3c9de.jpeg)

---

<div class="post-metadata">

**Author:** ![Andrii](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/andrii/32/33514_2.png) [@Andrii](https://community.cambiumnetworks.com/u/Andrii)\
**Post date:** [November 3, 2026, 2:12pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/2 "2026-11-03T14:12:41Z")

</div>

Hi @Robert_Hussong !

What about Tx Power settings on SM side?

---

<div class="post-metadata">

**Author:** ![ninedd](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/n/57b2e6/32.png) [@ninedd](https://community.cambiumnetworks.com/u/ninedd)\
**Post date:** [November 3, 2026, 9:57pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/3 "2026-11-03T21:57:18Z")

</div>

The two things I’d check is

- TX Power in the SM side, or
- SM set to Auto and the AP target signal so to -76

---

<div class="post-metadata">

**Author:** ![Jane\_Katassi](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/jane_katassi/32/32670_2.png) [@Jane\_Katassi](https://community.cambiumnetworks.com/u/Jane_Katassi)\
**Post date:** [November 6, 2026, 3:28pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/4 "2026-11-06T15:28:03Z")

</div>

Thats the tx power

 ![Screenshot_20261106-182717](https://d1okf4ta8xniw3.cloudfront.net/original/3X/c/5/c52912c019ce7df0469da79efb6c59f9b5fc7148.jpeg)

---

<div class="post-metadata">

**Author:** ![Andrii](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/andrii/32/33514_2.png) [@Andrii](https://community.cambiumnetworks.com/u/Andrii)\
**Post date:** [November 6, 2026, 3:38pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/5 "2026-11-06T15:38:32Z")

</div>

Try to set **Tx Powe** r Manual and then **Transmit Output Power** 29dB

---

<div class="post-metadata">

**Author:** ![ninedd](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/n/57b2e6/32.png) [@ninedd](https://community.cambiumnetworks.com/u/ninedd)\
**Post date:** [November 7, 2026, 3:49am UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/6 "2026-11-07T03:49:30Z")

</div>

So the SM is actually set to Auto - which means it’ll try to adjust it’s output Tx power to match what the AP’s “Subscriber Module Target” is set to on the AP.

So, on the SM there is this Auto / Manual switch…

 ![Screenshot_20261106_212822_Chrome](https://d1okf4ta8xniw3.cloudfront.net/original/3X/1/3/1353aaa47e1270333d61369e5667a71d691fbcbe.jpeg)

So, two options:

1. Set this to Manual, and then adjust the power setting at the top from 15 to 27 or 29 or whatever it’ll go to, and save to activate those settings.

2. Better option is to log into the AP and look for the “Subscriber Module Target” and adjust that to -60 or -56 it whatever gives the best Modulation result.

 ![Screenshot_20261106_213513_Chrome](https://d1okf4ta8xniw3.cloudfront.net/original/3X/c/c/cc73618c28df3ca1e2d30ddd735cd108c7fa33ad.jpeg)

Either method should work, so simply setting the SM to Manual and setting it’s power up it’s fine to try first.

But long term, it’s usually best to set the Receive Target on the AP to -60 or so, and then set your SMs to Auto so that they can adjust their own power up or down based on changing conditions, and so all the SMs associated can be as balanced as possible.

---

<div class="post-metadata">

**Author:** ![Jane\_Katassi](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/jane_katassi/32/32670_2.png) [@Jane\_Katassi](https://community.cambiumnetworks.com/u/Jane_Katassi)\
**Post date:** [November 8, 2026, 2:21pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/7 "2026-11-08T14:21:47Z")

</div>

Thanks for the support and time given to help me out le me try and get back to u asap

---

<div class="post-metadata">

**Author:** ![Jane\_Katassi](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/jane_katassi/32/32670_2.png) [@Jane\_Katassi](https://community.cambiumnetworks.com/u/Jane_Katassi)\
**Post date:** [November 8, 2026, 2:26pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/8 "2026-11-08T14:26:15Z")

</div>

![Screenshot_20261108-172426](https://d1okf4ta8xniw3.cloudfront.net/original/3X/0/3/03105f007b3fba2075d9b2fd7a88d2a5dc9188b7.jpeg)guess what having done what u said thingz have turned positive i dont knw how much i should appreciate

 ![Screenshot_20261108-172500](https://d1okf4ta8xniw3.cloudfront.net/original/3X/f/0/f04ddf1826d659018e44ec599b14231abd293141.jpeg)

---

<div class="post-metadata">

**Author:** ![ninedd](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/n/57b2e6/32.png) [@ninedd](https://community.cambiumnetworks.com/u/ninedd)\
**Post date:** [November 9, 2026, 5:56pm UTC](https://community.cambiumnetworks.com/t/upload-rssi/109153/9 "2026-11-09T17:56:05Z")

</div>

That’s great Robert\_Raymond 👏
