# Visio stencils for Cambium equipment **URL:** \ **Category:** Welcome Board\ **Created:** [March 13, 2017, 9:30am UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036 "2017-03-13T09:30:48Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Matteo\_Borghi](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/m/b19c9b/32.png) [@Matteo\_Borghi](https://community.cambiumnetworks.com/u/Matteo_Borghi)\ **Post date:** [March 13, 2017, 9:30am UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/1 "2017-03-13T09:30:48Z")
Hello, Does anyone have Microsoft Visio stencils for Cambium equipment? I've alredy download available stencils for PMP 450, PTP 650 and ePMP, but I also need stencils for CMM4 (and/or CMM5), PMP 450m (Medusa) and PMP 450i, UGPS, Grounding Kit, and other equipment. They are available? Thanks in advance. ---
**Author:** ![RayS](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/rays/32/11680_2.png) [@RayS](https://community.cambiumnetworks.com/u/RayS)\ **Post date:** [March 13, 2017, 6:39pm UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/2 "2017-03-13T18:39:29Z")
Hello - you can find visio stencils [HERE](https://support.cambiumnetworks.com/files/visio/). Ray ---
**Author:** ![Matteo\_Borghi](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/m/b19c9b/32.png) [@Matteo\_Borghi](https://community.cambiumnetworks.com/u/Matteo_Borghi)\ **Post date:** [March 13, 2017, 10:10pm UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/3 "2017-03-13T22:10:48Z")
Hello, I've alredy download all the stencils available in that section but I can't find stencils for some (very common) Cambium equipment. In particular I need stencil for: - PMP AP 450i (integrated and connectorized) - PMP AP 450m - PMP SM 450i (integrated and connectorized) - PMP SM 450d (with and without dish mount) - CMM4 (indoor and outdoor unit) - CMM5 (modular unit) - UGPS Does this stencils exist? Can Cambium's staff provide them for community? Thanks. ---
**Author:** ![Netjinks](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/n/ecae2f/32.png) [@Netjinks](https://community.cambiumnetworks.com/u/Netjinks)\ **Post date:** [September 25, 2019, 5:57pm UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/4 "2019-09-25T17:57:15Z")
I am looking for these as well I need the equipment that is rack mounted like CMM3-5 and the Ranger BBU,RRH and SM and sector antenna. Thank You. ---
**Author:** ![j2sw](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/j2sw/32/20238_2.png) [@j2sw](https://community.cambiumnetworks.com/u/j2sw)\ **Post date:** [March 6, 2021, 4:26am UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/5 "2021-03-06T04:26:23Z")
Ray, Any CNMatrix gear in stencil form? Needing to put together a diagram using CNMatric and CNPilot. ---
**Author:** ![Ryan\_Ray](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/r/58956e/32.png) [@Ryan\_Ray](https://community.cambiumnetworks.com/u/Ryan_Ray)\ **Post date:** [March 8, 2021, 6:54pm UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/6 "2021-03-08T18:54:51Z")
@RayS Also Stencils for V5000, V3000 and V1000 please. ---
**Author:** ![Simon\_Jones\_Mondo](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/s/2bfe46/32.png) [@Simon\_Jones\_Mondo](https://community.cambiumnetworks.com/u/Simon_Jones_Mondo)\ **Post date:** [July 13, 2023, 4:21am UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/7 "2023-07-13T04:21:50Z")
@RayS Also Stencils for PTP820G please. ---
**Author:** ![RayS](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/rays/32/11680_2.png) [@RayS](https://community.cambiumnetworks.com/u/RayS)\ **Post date:** [July 14, 2023, 3:21pm UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/8 "2023-07-14T15:21:02Z")
Let me see what I can find for you. Ray ---
**Author:** ![rapidsystems](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/r/85e7bf/32.png) [@rapidsystems](https://community.cambiumnetworks.com/u/rapidsystems)\ **Post date:** [December 12, 2024, 2:09pm UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/9 "2024-12-12T14:09:36Z")
Will there be a revised file for 2024/2025? We are needing the stencil for the cnMatrix EX3024F ---
**Author:** ![Erik\_Alexander\_Rodri](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/e/aeb1de/32.png) [@Erik\_Alexander\_Rodri](https://community.cambiumnetworks.com/u/Erik_Alexander_Rodri)\ **Post date:** [April 11, 2025, 5:56am UTC](https://community.cambiumnetworks.com/t/visio-stencils-for-cambium-equipment/50036/10 "2025-04-11T05:56:35Z")
i cant use this files on visio, how can i do?