WB2907H LPU End Kit Instruction sheet

Products PTP
1

I am looking for the instruction sheet which comes with new WB2907H LPU End Kits (if one exists). The reason is: I Have WB2907B Version produced during the Motorola ownership. The instruction sheet in each box (Motorola Doc Ref: phn1096_001v007) specified Amored cable from Superior Essex type BBDGE CAT5e and Tyco (AMP) modular connector 5-569278. The Superior Essex cable (now known as EnduraGain OSP Armored part number 04-001-55) is what I use. The Tyco(AMP) 5-569278 connector is no longer in production. What I want to know is what connector does Cambium now recommend for the Superior Essex cable? I think it may be listed on new LPU instructions sheets, but I have never seen one. By the way, LPU instruction sheets are not available in your downloads section. Perhaps they should be.

2

Hi,

The latest Installation Guide is phn-3348 006v000. It's available at https://support.cambiumnetworks.com/files/ptp650/ and attached here. I'll make sure it's also on the PTP 600 and PTP 670 pages.

Mark

3

Thank you but the latest sheet references the WB3177 connector which may still be the Tyco (AMP) 5-569278 connector. TE Connectivity (as Tyco AMP became known) discontiued that connector in April 2015 and makes no replacement for it. See attatached TE Connectivity PCN to verify for yourself. So I still want to know, what connector does Cambium recommend for use with the LPU Kits which are sold for use with the the PTP 600, 650, and perhaps other products.

4

Hi,

The Cambium part number WB3177B is still the one you want here. The connectors previously made by Tyco are now made by CommScope, under the same 6-569278 part number, and this is what we supply in WB3177B.

I've attached the CommScope data sheet.

Mark