# What are the key functionalities to understand about ePMP network entry?

**URL:** <https://community.cambiumnetworks.com/t/what-are-the-key-functionalities-to-understand-about-epmp-network-entry/55691>\
**Category:** ePMP\
**Tags:** knowledge-base\
**Created:** [April 8, 2018, 10:02pm UTC](https://community.cambiumnetworks.com/t/what-are-the-key-functionalities-to-understand-about-epmp-network-entry/55691 "2018-04-08T22:02:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cambium\_Marty](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/cambium_marty/32/11547_2.png) [@Cambium\_Marty](https://community.cambiumnetworks.com/u/Cambium_Marty)\
**Post date:** [April 8, 2018, 10:02pm UTC](https://community.cambiumnetworks.com/t/what-are-the-key-functionalities-to-understand-about-epmp-network-entry/55691/1 "2018-04-08T22:02:28Z")

</div>

Upon powering on an ePMP point-to-multipoint system (Access Point and Subscriber Modules), the Subscriber Modules attempt network entry (registration) to the Access Point, and the following functionalities are inherent to the network entry process:

- The SM selects the best AP in terms of Received Signal Strength Indicator (RSSI) and Signal-to-Noise Ratio (SNR)
- The SM attempts registration based on the Preferred APs list (if configured)
- For each AP, the SM must comply with the APs configured security method
- 120 SMs can subscribe to one AP (or 10 SMs for AP Lite)
- SMs outside of the configured Max Range (configured on AP) will not&nbsp;be allowed network entry
- SMs will not be allowed network entry if the number of SMs subscribed to the AP is at maximum capacity
- All SMs may enter the network simultaneously within a two minute timeframe after the AP has completed bootup
- All SM ranging (used for framing calculations) is performed at network entry
