What SNMP MIBs are supported by Canopy?

Canopy devices support RFC1213 MIB-II.
Software releases after 3.2.5 extend these variables for SNMP with a Canopy Enterprise MIBs.
To use the Canopy Enterprise MIBs you must have a NMS using SNMP and loaded with the Canopy MIBs.
Trap address is configurable which will tell the module where to send traps.
SNMP accessing subnets must use 8, 16, 24, or 32 bit masks.
The Canopy Enterprise MIBs, documented in ASN.1 language, consists of five MIB text files.