Same issue as Identical unanswered issue
as well as identical unsolved issue
Just received 2 each PMP 450m Medusa radios and excited to get these deployed asap to solve a particular problem. An unknown technician attempted to configure them but was unsuccessful. They have been handed off to me to finish configuration and deploy.
Without any documentation, I used the 169.254.1.1 recovery address to access the “Radio Recovery Console” page. The recovery process was easy and similar to the PTP670 process off power cycling.
Herein lies my problem… No matter what I do, this is the only page I will ever see. Boot in “default-mode”, BAM! reboots and lands me back on the “Radio Recovery Console”. Boot in “normal mode”, BAM! reboots and lands me back on the “Radio Recovery Console”. Backup Recovery by upgrading tar file, BAM! reboots and lands me back on the “Radio Recovery Console”.
This is happening on both units and I am getting desperate. Firmware is CANOPY 24.1 (Build official), and also have CANOPY 21.1_0_1 (Build official), have tried both to no avail.
Power injector is Cambuim supplied and supported and I am using the main PSU port for data… PLEASE HELP!!!
