How can I access a cnPilot router on the other side of an ePMP SM in NAT mode? If the ePMP SM is in Bridge mode, I have no problems accessing the cnPilot router.
You'll need to enable port forwarding on the ePMP SM and configure the forwarding rules to the appropriate management port(s) and IP on the WAN interface of the cnPilot... or enable DMZ to the cnPilot's WAN IP.
@Eric Ozrelic wrote:You'll need to enable port forwarding on the ePMP SM and configure the forwarding rules to the appropriate management port(s) and IP on the WAN interface of the cnPilot... or enable DMZ to the cnPilot's WAN IP.
I tried DMZ but that didn't work. I will try port forwarding.