Can two BH link bundle to one for increasing the bandwidth?
The link of BH 20 is 14Mbps,can we use 4 BH 20 to establish 2 links at one end-to-end.and use as a link to increase the bandwidth to 28Mbps.
We do have customers using Canopy in this way. Some routing protocols will automatically load balance if there are equal cost paths. The Canopy links, set up in the way you mention below, will be load balanced if your network equipment on the ends will support it and is also configured for it.
BTW, Canopy did come out with a 45Mbps BH unit this week. See the press release at the following link: http://motorola.canopywireless.com/press/062304a.php
houzy wrote: Can two BH link bundle to one for increasing the bandwidth?
The link of BH 20 is 14Mbps,can we use 4 BH 20 to establish 2 links at one end-to-end.and use as a link to increase the bandwidth to 28Mbps.
yes, you can aggregate bandwidth. But you'd only achieve 28Mbps in special cases. Typically, you'd see substantially less because of load balancing inefficiencies.
this article might help...
http://www.cisco.com/en/US/about/ac123/ ... 0176b.html
hth
-steve