Introduction
This document highlights new features and significant updates in cnMaestro Cloud.
Important: Web Browser
Restart your browser (or clear the browser cache with a hard reload) if you are having UI problems with the 4.1.0 update.
cnMaestro X Assurance ![4.1.0-XA](https://d1okf4ta8xniw3.cloudfront.net/original/3X/8/8/88a4d5762621bf2ea45373abdc7a3776678d2339.png)
cnMaestro X Assurance is an AI-based advanced troubleshooting and analytics solution that helps IT administrators improve the end-user experience on their networks. X Assurance is initially available as a free trial to all X customers in the cloud. Starting in Q1’2024, it will require a paid subscription.
X Assurance uses the power of Artificial Intelligence to analyze client connections and related data to detect issues and failures. It discovers failure and success patterns across many client connections, and it identifies root causes when problems occur. Performance benchmarks (KPIs) are established by collecting and analyzing data to provide contextual failure analysis. Alerts and actions are generated based on predefined thresholds.
A root cause analysis engine in X Assurance captures vital information about client connections, whether they were successful or not. It generates client reports containing details like latencies, IP addresses, and usernames. It identifies possible reasons for failures, such as authentication issues or DHCP/DNS problems, easing troubleshooting and resolution.
X Assurance also monitors the health of Wi-Fi Access Points, networks, and RF (Radio Frequency) characteristics to detect issues. It alertson problems such as low signal strength, excessive channel utilization, DNS or DHCP failures, etc.
Note : cnMaestro X Assurance is available in cnMaestro X cloud accounts only.
Site Level Assists ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Assists are now available at the Site level. This feature scans supported device configuration across a Site and generates an Assists Score, displayed as a percentage of successful evaluations. This provides valuable insights, recommendations, and troubleshooting assistance. With Assists, network administrators gain enhanced visibility, proactive recommendations, and improved efficiency in managing their networks.
ePSK Lifecycle Management ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
ePSK (Enhanced Pre-Shared Key) Life Cycle Management offers a range of benefits for managed Wi-Fi services. ePSK ensures a secure and hassle-free experience for residents, eliminating the need to manage numerous PSKs (Pre-Shared Keys) manually. This new feature includes automatic expiry of ePSKs; seamless renewal of keys; and inline modification of ePSKs – all aimed at simplifying the management process. For added convenience, ePSKs deactivate automatically on specified future dates, such as the resident’s move-out date. Network managers can easily adjust these termination dates in the event of changes, ensuring a smooth and efficient Wi-Fi service for all residents.
Personal Wi-Fi ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Personal Wi-Fi addresses requirements in Multi-Dwelling Units (MDUs) and similar hospitality-related networks. Each user on the network effectively operates on their own secure Wi-Fi network as if they had a personal Wi-Fi router. Users can seamlessly roam across the property with ubiquitous connectivity while maintaining personal security via a unique ePSK and VLAN. This functionality is provided with a unique SSID for the user in their personal space (apartment, dormitory room, etc.) but with a common property SSID in public areas. The same personal ePSK credentials are used across both SSIDs, and roaming is seamless for the user. For property managers, this personalized approach ensures tenant privacy and security while minimizing administration overhead.
Graphical Reports ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Graphical Reports represent data visually to improve consumption and summarization. They can be generated and customized with logo, brand image, and theme by creating/editing Graphical Report Templates with selected widgets. These reports can be generated by clicking Add New Graphical Report at System and Site levels under Reports > Scheduled. Each report can be downloaded in PDF format and contains graphs, charts, and data tables.
To create Graphical Report Template, navigate to Configuration > Graphical Report Template and click on Add New button.
Add New Graphical Report Template window pops up with Name, Title, Scope, logo, brand image, and themes.
New widgets can be mapped to a System or Site scope.
To generate Graphical Reports, navigate to System/Site > Reports > Scheduled and click Add New Graphical Report. Enter the details and select the template.
Once the report is generated, download it in PDF format from the Completed tab.
Note : There is a limit of 50 Scheduled Reports at the cnMaestro Base Infrastructure level, and 15 Scheduled Reports for each Managed Account.
Wi-Fi Events
The Wi-Fi Events tab is introduced into the Notifications tab and helps administrators view wireless client events over the last 24 hours.
NSE 3000 Enhancements
Group Configuration
Starting with NSE 3000 release 1.4, users can group IP addresses and applications or categories, associating policies like DNS filters, firewalls, or WAN failover policies with the created groups.
User Groups Configuration
User Groups group network addresses, which can be associated with DNS filters, application filters, and failover policies. Users can configure up to 16 User Groups.
IP Groups Configuration
IP Groups group network addresses and are primarily used for device access from WAN. Device access is limited to the source addresses configured in the IP Groups. Users can configure up to 16 IP Groups.
Application Groups Configuration
Application Groups group applications and categories. Combined with User Groups, they facilitate traffic filtering to an application from a collection of network addresses. Users can configure up to 16 Application Groups.
Application Visibility and Control (AVC) Based on Source IP/Subnet
Starting with NSE 3000 release 1.4, AVC based on Source IP/Subnet is enhanced, empowering users to filter traffic based on the combination of User Group and application identity. This allows users to block applications or groups of applications from specific IP addresses or subnets, as defined by User Groups and Application Groups.
DNS Based Content Filtering
Starting with NSE 3000 release 1.4, DNS based content filtering allows users to block DNS requests belonging to specific categories and originating from specified User Groups. This feature supports 88+ DNS categories, making it suitable for content filtering in education, enterprise, and other verticals.
The feature also supports the DNS overrides. When configured as a DNS server, NSE 3000 redirects DNS requests destined to global DNS servers (like Google or Cloudflare) to the DNS server running on NSE 3000.
WAN Failover Policy
Starting with NSE 3000 release 1.4, users can define the WAN Failover Policy and install rules that block IP addresses or applications (or groups of applications) originating from specified User Groups. NSE 3000 automatically computes the number of available WAN links for traffic forwarding and applies the failover policy for a WAN link if it is the only available option for traffic forwarding. This feature allows users to prioritize critical applications on an expensive WAN link when no other option is available for traffic forwarding.
60 GHz cnWave Enhancements
Node and Link Throughput Tests in Map ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Node Throughput test is added in Map, which runs between the Node and PoP. An option is provided to test hop-by-hop and non-hop-by-hop throughput tests. Select CN/DN node on the Map and then select Node Throughput Test under the node menu options to run the throughput test.
A link Throughput test is added in Map, which runs between link endpoints. Select a link on the Map and then select Link Throughput Test under the link menu options to run the throughput test.
Current Best Route Scan ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
The current best route of the selected node (CN/DN) will be plotted on the Map from a selected node (CN/DN) to the destination node (PoP). If multiple paths are available, each will be plotted with different colors. Select CN/DN node on the Map and then select Current Best Route(s) under node menu options.
Airtime/Throughput Statistics ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Airtime and Throughput options are available under Link Overlay mode on the Map. Once Airtime/Throughput option is selected, values are displayed on the Map. These details are available on the Links > Statistics page.
Added Rx/Tx Throughput Performance Graphs under Node > Performance.
Beam Azimuth and Elevation Angle in Links Statistics
Added Tx/Rx Beam Azimuth and Elevation Angle statistics for the links in the Links > Statistics page. These statistics can be exported.
Remote Command for Wired Interface Changes
Added a new remote command Show Wired Interface State Changes under E2E Network > Tools > Remote Command.
Assists for cnWave 5G Fixed ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Assists are now supported for cnWave 5G Fixed devices. This feature scans device configuration and generates an Assists Score, displayed as a percentage of successful evaluations. Assists summary scores are available in the hierarchy at System, Network, and Device (BTS and CPE) levels.
Assists Dashboard
The Assists Dashboard presents the Assists Score and the list of evaluated Assists.
Affected Devices
Devices failing evaluation are displayed in a table.
cnWave 5G Fixed BTS and CPE Dashboards with Assists Score
Miscellaneous Changes
General UI Updates
These include improved data tables with rollover actions and docking the Action buttons at the bottom to improve vertical scrolling in NSE Groups, Switch Groups, and Wi-Fi Profiles pages.
Additionally, consistent status columns provide a cleaner and more intuitive interface for better navigation and management. Software update and download icons are also updated.
Data Reports ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Previously data reports were generated under the Reports tab. They have been moved to Reports > Scheduled. Data reports can be generated by clicking Add New Data Report. The maximum pagination count for Reports is 25.
Extended Historical Data ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
Long term historical data has been increased from 12 to 14 months for enterprise products and 24 to 26 months for fixed wireless products.
Enterprise Products
Fixed Wireless Products
Custom Interval in Client Reports
Network administrators can configure Custom Time Range in Client Reports to provide more flexibility and precision in analyzing client data.
Unconnected Clients
Unconnected Clients are available under the Clients tab at System, Network, and Site levels with current, 24 hours (X), and 7 days (X) duration. The device level shows current unconnected clients.
Show KPIs at Network/Tower Levels for Managed Device Types
Managed device types KPI widgets will be shown at Network and Tower levels. Only four KPI widgets will be displayed by default when no devices are onboarded. Wireless client KPIs will be available if any Wi-Fi Access Points (APs) are onboarded.
Increased Email Subscribers from 2 to 10
Email notifications will support 2 subscribers in an Essentials account and 10 in an X account per scope (All Accounts, Managed Account, and Base Infrastructure).
API Updates ![X](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/7/d736100524fa7543a20aa8ceeae571205be85107.png)
The Swagger documentation for the updated RESTful API is available at: cnMaestro 4.0.1 API.
New APIs
Path | Details |
---|---|
GET /api/v2/cnmatrix/switch_groups | Return list of Switch Groups. |
GET /api/v2/cnmatrix/switch_groups/{switch_group_name} | Retrieve details of a specific Switch Group. |
POST /api/v2/cnmatrix/switch_groups | Create a Switch Group. |
PUT /api/v2/cnmatrix/switch_groups/{switch_group_name} | Update a Switch Group. |
DELETE /api/v2/cnmatrix/switch_groups/{switch_group_name} | Delete a Switch Group. |
DELETE /api/v2/msp/managed_accounts/{managed_account}/cnmatrix/switch_groups/{switch_group_name} | Delete a Switch Group under a managed account. |
cnMatrix Port Configuration | |
PUT /api/v2/cnmatrix/ports | Update port(s) based on MAC addresses and creates auto-sync job. |
Wi-Fi Enterprise WLAN | |
PUT /api/v2/wifi_enterprise/wlans/{wlan_name}/epsk/edit | Modify the existing ePSK entries within an ePSK Policy. |
Supported Cambium Products
cnMaestro supports the following Cambium Networks products. The software versions are the minimum required to use cnMaestro (not the recommended versions).
Family | Model | Version |
---|---|---|
60 GHz cnWave | V1000 | 1.0 |
V2000 | 1.2.2-beta3 | |
V3000 | 1.0 | |
V5000 | 1.0 | |
cnMatrix | EX2K/EX1K | 2.0.4-r1 |
EX3K | 5.0.1 | |
cnPilot Home | cnPilot R200, R200P | 4.4.2-R2 |
cnPilot R201, R201P | 4.4.2-R2 | |
cnPilot R190V, R190W | 4.4.2-R2 | |
cnPilot R195P | 4.5.2 | |
cnPilot R195W | 4.7 | |
cnRanger | Sierra 800 | 1.0.1.0-r1 |
Tyndall 101 | 1.0.1.0-r1 | |
Tyndall 201 | 2.0.0.0-r1 | |
cnReach | N500 | 5.2.17e |
cnVision | Hub 360r, FLEXr | 4.6 |
Client Micro, Mini, Maxr | 4.6 | |
cnWave 5G Fixed | B1000 (BTS) | 2.0 |
C100 (CPE) | 2.0 | |
Edge Controller | N/A | 1.0.0 |
Enterprise Wi-Fi | cnPilot e400/e500 | 2.5.2-r3 |
cnPilot e410/e430w/e600 | 3.5.2-R4 | |
cnPilot e501S/e502S | 3.2.1-r6 | |
cnPilot e700 | 3.8 | |
cnPilot e425/e505 | 4.0-r17 | |
cnPilot e510 | 3.11.4-r9 | |
XE3-4 | 6.4 | |
XE3-4TN | 6.5.1 | |
XE5-8 | 6.4.1-r15 | |
XV2-2 | 6.1 | |
XV2-2T0 | 6.4 | |
XV2-2T1 | 6.4.1-r15 | |
XV2-21X | 6.5 | |
XV2-22H | 6.5 | |
XV2-23T | 6.5 | |
XV3-8 | 6.0 | |
ePMP 1000 Hotspot | ePMP 1000 Hotspot | 2.5.2-r3 |
ePMP | ePMP 1000, Force 180/200 | 2.6.2 |
ePMP 2000 | 3.0.1 | |
ePMP Elevate XM/XW | 3.2 | |
ePMP Force 190 | 3.5 | |
ePMP Force 300 | 4.1 | |
ePMP PTP 550 | 4.1.1 | |
ePMP Force 130 5 GHz | 4.3.2 | |
ePMP 3000L | 4.3.2 | |
ePMP Elevate SXGLITE5, LHG5 | 4.3.2.1 | |
ePMP Force 130 2.4 GHz | 4.4 | |
ePMP Force 300-19, 19R, 13 | 4.4 | |
ePMP 3000 | 4.4.1 | |
ePMP PTP 550 E | 4.4.2 | |
ePMP MP 3000 | 4.5 | |
ePMP Force 300-13L | 4.5.2 | |
ePMP Force 300-13LC, 22L, 25L | 4.6 | |
ePMP Force 200L | 4.7.0 | |
ePMP 4000, Force 400 GPS, 400 CSM, 425 | 5.1.0 | |
ePMP 4600, ePMP4600L, ePMP Force 4600C, ePMP Force 4525, ePMP Force 4500, ePMP Force 4625 | 5.4.0 | |
NSE | NSE 3000 | 1.2-b5 |
PMP | PMP 450i, PMP 450, PMP 450m, PMP 430 SM | 15.0.1 |
PTP 450, and PTP 450i | 15.0.1 | |
MicroPoP Omni/Sector | 16.2.1 | |
PTP | PTP 650 | 01-47 |
PTP 670 (650 Emulation) | 01-47 | |
PTP 670, PTP 700 | 02-67 | |
PTP 820/850 | PTP 820C, 820E, 820F, 820G, 820S | 11.9 |
PTP 850C, 850E | 11.9 | |
Xirrus (Enterprise Wi-Fi) | XA4-240 | 8.7.0 |
XD2-230 | 8.7.0 | |
XD2-240 | 8.7.0 | |
XD4-130 | 8.7.0 | |
XH2-120 | 8.7.0 | |
XH2-240 | 8.7.0 | |
XR-620 | 8.7.0 | |
XR-630 | 8.7.0 | |
XR-2226 | 8.7.0 | |
XR-2236 | 8.7.0 | |
XR-2247 | 8.7.0 | |
XR-2426 | 8.7.0 | |
XR-2436 | 8.7.0 | |
XR-2447 | 8.7.0 | |
XR-4426 | 8.7.0 | |
XR-4436 | 8.7.0 | |
XR-4447 | 8.7.0 |
Supported Browsers
cnMaestro supports the following browsers:
Platform | Browser | Version |
---|---|---|
Linux | Firefox | 45 and above |
Chrome | 49 and above | |
MacOS | Safari | 9 and above |
MS Windows | Internet Explorer | Deprecated |
Microsoft Edge | 44.17763.1.0 | |
Firefox | 45 and above | |
Chrome | 49 and above |
Significant Fixes
The following issues have been fixed:
Id | Details |
---|---|
CNSSNG-10984 | Server error on failed bulk delete. |
CNSSNG-14152 | Client Count graph plots incorrectly in an AP Group. |
CNSSNG-15390 | PMP software update and name change warning messages handled incorrectly. |
CNSSNG-19406 | 0.0.0.0/0 ip_route is invalid configuration and cannot be deleted from AP Groups. |
CNSSNG-23525 | Bulk claim of APs (more than 100) at Site level with AP Group mapped, failed intermittently. |
CNSSNG-26352 | Unified onboarding API for Cloud/On-Premises with respect to MAC/MSN. |
CNSSNG-26898 | Unable to add new domain users. |
CNSSNG-28973 | cnMaestro-XP: Database indexing notification. |
CNSSNG-29160 | Clients intermittently show high max rates (max rate client has reached) or NaN. |
CNSSNG-30044 | cnMaestro-XP: APs show offline but are functional. |
CNSSNG-30280 | [AutoCell] Default Minimum Transmit Power should be 8. |
CNSSNG-30936 | The GPS firmware version reported by Canopy AP (with internal or external GPS) must be displayed in cnMaestro. |
CNSSNG-31152 | Only 1000 voucher sessions are allowed. |
CNSSNG-31827 | Template macros within replacement variables are broken |
CNSSNG-32335 | Not able to see channels. |
CNSSNG-32511 | In AP Dashboard, clicking on the Client Count KPI navigates to the System > Clients page. |
CNSSNG-32756 | cnWave 5G Fixed BTS shows offline in cnMaestro. |
CNSSNG-32760 | cnMaestro API accepts special character (linefeed, carriage return) as part of an AP’s hostname. |
CNSSNG-33195 | GET API fetches all records for devices API when limit is set to 0 in the API request |
CNSSNG-33423 | Sorting the client list is not working. |
CNSSNG-33720 | Application Visibility: Total bytes data at site level and System level are not same. |
Known Issues
The following issues exist:
Id | Issue | Details |
---|---|---|
CNSSNG-11299 | AP Regulatory Channel list support check needed for checking valid channels. | |
CNSSNG-11389 | Microsoft Edge Browser does not support in system OVA file upgrade. | Workaround : Use the Google Chrome browser |
CNSSNG-12812 | cnPilot R-series dual radio devices (r-201P, r-195W) AP Group country code/SSID configured from overrides getting applied only to 2.4 GHz radio. | |
CNSSNG-12888 | Connected Clients count in the WLAN page is not properly shown when SSID is overridden for the WLAN at Device level. | |
CNSSNG-13054 | Mismatch in Clients count for cnPilot E-series device at WLAN and AP Group configuration level. | |
CNSSNG-14030 | CBRS race condition: SM “stuck” in cnMaestro during reparenting if import and start occurs as SMs arrive in onboarding queue. | Workaround : To avoid this issue, follow the suggested SM reparenting procedures listed in the latest version of Cambium CBRS standalone procedures document. |
CNSSNG-14518 | Device Type selection needs to be provided at Site and AP Group for Report generation. | |
CNSSNG-14932 | PMP/ePMP Configuration Backup: LAST BACKUP date and time is not updating if device under an MSP account. | |
CNSSNG-15356 | If a device has a weak serial number in a non-CBRS build, and the sector is imported first, the device will not contact cnMaestro. | |
CNSSNG-15432 | Deleting a device in Base Infrastructure and claiming it immediately to another Managed Account returns Device Registration Failed message. | |
CNSSNG-15595 | cnMatrix Hostname fall backs to old Hostname if the template is pushed for the first time (if a Switch Group already exists). | |
CNSSNG-15656 | Duplicate entries observed in 802.11ax Clients Report. | |
CNSSNG-16197 | CBSDID search will not work when device was synced from tool without obtaining grant first. | Workaround : Perform CBSDID search from domain proxy view on Cloud to obtain mac address, then perform MAC address search on tool to find the device. |
CNSSNG-18856 | cnVision Client is not shown under hub. | Workaround : Reboot the Client |
CNSSNG-18913 | On resizing, the graph/widgets are not properly rendering. | |
CNSSNG-18923 | After migration Reports Job page is empty due to cached data. | Workaround : Clear Cache and Cookies after migration. |
CNSSNG-18927 | Configuration push from Onboarding page is getting device timeout error in ePMP 1000 Hotspot device. | |
CNSSNG-18936 | Graph plotting is empty if the page is zoomed out/in. | |
CNSSNG-19264 | Unmanaged expired device approve button is not disabled. | |
CNSSNG-19275 | Issues related to offline alarm of expired devices. | |
CNSSNG-20508 | Last Super Administrator deletion should be shown proper error message. | |
CNSSNG-20605 | User-Defined Overrides (Advanced) should be handled from Switch Groups > Switches > Actions > Configuration tab. | |
CNSSNG-20745 | AP Count is -1 in Anchor when deregistering the device from Anchor. | |
CNSSNG-20820 | After server upgrade, device throws error [Invalid CBSD ID and Grant ID], even though the Domain Proxy shows the device is registered. | |
CNSSNG-21068 | Not able to deregister or delete the SM when PMAC mismatched (SM reported different PMAC). | Workaround: Reinitialize the SM from inside the sector of the AP, not by directly searching for the SM in the tool; then deregister and delete the device. |
CNSSNG-21264 | Auto refresh does not work when Site/Tower/Device details are updated in Network level map. | |
CNSSNG-21271 | SM status is missing in AP details on map. | |
CNSSNG-21345 | RF Statistics related information should not be available in reports for XV type device. | |
CNSSNG-21396 | Issues related to cnMatrix onboarding overrides. | |
CNSSNG-22089 | New Changes in Clients report in 3.1.0. | |
CNSSNG-23732 | Min Data Rate and Multicast Data Rate configuration push always sets default for both bands. | |
CNSSNG-24529 | Multi-floor issue with Firefox browser. | |
CNSSNG-24823 | Device overrides and config apply will not work after Migration from 3.1.0 to 3.1.1 due to cache. | |
CNSSNG-24826 | Site Floorplan: in Edit mode, able to drag devices outside the boundary without an error. | |
CNSSNG-25071 | If ePSK entries exist under an MSP WLAN, then upon disabling MSP in the account, the MSP WLAN ePSK count persists. | |
CNSSNG-25150 | AOS device Configuration Job times out if Device is in DHCP. | |
CNSSNG-25238 | AOS device WebSocket does not disconnect for an X account downgraded to Pure ESS after Retention expired. | |
CNSSNG-25758 | Able to see cnPilot R-series AP Groups in Enterprise View. | |
CNSSNG-26188 | Error on deleting NSE device from the inventory page. | |
CNSSNG-26871 | Client Local Table intermittently displays no data even when clients are connected. | |
CNSSNG-26911 | NSE configuration page should use Management IP as clickable link, not WAN Address. | |
CNSSNG-27055 | Port numbering in UI does not match physical labels. | |
CNSSNG-27223 | Not able to override passphrase of SSID when SSID contains special character “.” when created at group level (for ex: dot). | |
CNSSNG-27314 | No toast message displayed on deleting a NSE Group linked to a device. | |
CNSSNG-27416 | NSE Groups - Firewall - Rule “Action” needs to be Deny only (read only). | |
CNSSNG-27581 | Configuration Variables (Advanced) details are not displayed for Switch groups in onboarding page. | |
CNSSNG-28101 | Logout option not visible in iPhone. | |
CNSSNG-28140 | Graphs alignment issues when menu bar is expanded. | |
CNSSNG-28151 | Total device count and count displayed in Recommended Software metrics do not match. | |
CNSSNG-28282 | Scheduled Reports for Expired device are completed. | |
CNSSNG-28292 | Major Alarm count does not match system level notifications. | |
CNSSNG-28306 | Usage summary displays Available and Used slots in the same color. | |
CNSSNG-28326 | AP Groups/Sites/Towers list all types of devices while generating reports. | |
CNSSNG-28377 | Number of onboarding devices from Dashboard does not match number of devices on Onboarding page. | |
CNSSNG-28433 | After rebooting a BTS, the Audit Log displays the entry as failed. | |
CNSSNG-28544 | While moving from one managed account to another, PTP device details are not updated properly. | |
CNSSNG-29982 | The LAN ports numbers on the NSE dashboard and the Network page of NSE group configuration should be identical. | |
CNSSNG-30024 | Total Bytes and other KPIs doubled if navigated from Top User. | |
CNSSNG-30040 | Change Bulk Edit and Import labels. | |
CNSSNG-30137 | Inactive VPN Sessions cleared after an hour and not after 24 hours. | |
CNSSNG-30142 | Some of the time ranges are missing for NSE performance graphs. | |
CNSSNG-30593 | In NSE, packet capture for VLAN 2000 fails with undefined error. | |
CNSSNG-30691 | Should not allow configuration of duplicate subnet in remote subnet and local subnet. | |
CNSSNG-30693 | DH group setting under IKE phase 2 of site-to-site tunnel cannot be set to disabled. | |
CNSSNG-30696 | Changes required if the IKE version 1 is selected. | |
CNSSNG-30697 | Remove the check box “enable inbuilt VPN server” from the VPN and RADIUS server page. | |
CNSSNG-30890 | Clicking apply filters when in bottom of page should open the apply filter pop upwards. | |
CNSSNG-30927 | Modify the remote subnet and local subnet fields under IPsec to have option to enter subnet in list form. | |
CNSSNG-30981 | Load Balancing is not allowing WAN 1 backup WAN 2 shared combination. | |
CNSSNG-30982 | Job Details popup should auto hide when navigated to device. | |
CNSSNG-31004 | The status of SNMP v2c assist for cnMatrix does not change from failed to passed. | |
CNSSNG-31006 | If the site contains NSE, cnMatrix, and Wi-Fi AP, the devices are not sorted correctly. | |
CNSSNG-31029 | For responder role, Site-to-Site VPN tunnel, remote address field is not present. | |
CNSSNG-31072 | VPN user Password and shared secret are not encrypted in exported configuration. | |
CNSSNG-31098 | Navigation to client is not working from Impacted Clients pop-up. | |
CNSSNG-31115 | Device type is blank for NSE in onboard reports. | |
CNSSNG-31116 | Navigation is broken when accessed from Jobs Page in Enterprise View | |
CNSSNG-31131 | Navigation is broken when accessed from Threats bar graph in System and Home in Enterprise View. | |
CNSSNG-31234 | Client host name is not updated in System > Applications > Application Name. | |
CNSSNG-31238 | Client host name alignment not proper in application tab. | Workaround: Enter less than 64 characters for Host Name |
CNSSNG-31439 | Sponsor does not receive approval mail when we have multiple domains in Domain list. | |
CNSSNG-31487 | Top Active Alarms link is not working for NSE in Enterprise View. | |
CNSSNG-31537 | The alarms are not displayed upon selecting the alarms count on alarms severity grid. | |
CNSSNG-31538 | DNS Filter page going blank if a DNS Policy is added with only name. | |
CNSSNG-31607 | Voucher without enable access can save. | |
CNSSNG-31613 | Reporting layer memory usage. | |
CNSSNG-31626 | Device type is blank for NSE in System Level reports. | |
CNSSNG-31626 | Export current page as CSV/PDF downloads all the client login events. | |
CNSSNG-31703 | Switch port ID sorting order is not correct, for example, showing 10 first before 2 when ascending order is used | |
CNSSNG-31883 | Techdump is not downloaded for PMP devices | |
CNSSNG-32091 | Wireless clients grid data appears as ON and OFF. | |
CNSSNG-32155 | Expired NSE Devices are not listed under System > Network > Tree and inventory after X-Trial ends. | |
CNSSNG-32313 | Wired client list is empty when navigated back from a client. | |
CNSSNG-33336 | Failed Reports are shown in green color. | |
CNSSNG-33442 | Audit logs are not generating while creating graphical report template. | |
CNSSNG-33660 | Template should have a scroll bar. | |
CNSSNG-33834 | Switch port operations are getting disabled. | |
CNSSNG-33861 | Completed reports should transfer to Completed column immediately when the jobs complete. | |
CNSSNG-33908 | PMP performance reports has some fields missing. | |
CNSSNG-34438 | In ESS: Clients connected to enterprise AP data is seen under Application history. | |
CNSSNG-34447 | Both BTS and CPE when do config push with “sysName” field, under Configuration tab the change is not reflecting. | |
CNSSNG-34600 | Brand image is not showing in preview. | |
CNSSNG-34621 | Renamed client host name not updated in site Analytics tab. |
Where to Get Help
There are several places to get help with cnMaestro.
Cambium Community : The cnMaestro Forum provides the best place to ask questions and get up-to-date information.
Cambium Support : The Cambium Support team is available 24x7 to answer questions and resolve issues.