CnPILOT E500 and E600 as a router directly from the Internet Service Provide(ISP)

Products cnMaestro
#1

Hello, I have 5 cnPilot e600 and 1 cnPilot E500 that am installing but i want to use them without an actual router but rather pick directly from the ISP, 

And I want them to work together(mesh)

Kindly help.

Regards

#2

Hi

Please share following details, to assist you better.

1. Network diagram.

2. Is your ISP line PPPoE / DHCP / Static

You can connect ISP line to the cnPilot APs directly and enable DHCP on the APs to provide IPs to the wireless connects.

Best Regards,

Gupta

#3

hi 

I want the cnpilots to be the ones to give DHCP

Kindly describe how i should do it because am not sure whether the ISP is PPoE, static or DHCP

#4
@Gupta-Bobby wrote:

Hi

Please share following details, to assist you better.

1. Network diagram.

2. Is your ISP line PPPoE / DHCP / Static

You can connect ISP line to the cnPilot APs directly and enable DHCP on the APs to provide IPs to the wireless connects.

Best Regards,

Gupta

hi 

I want the cnpilots to be the ones to give DHCP

Kindly describe how i should do it because am not sure whether the ISP is PPoE, static or DHCP

#5

Refer to following link to enable DHCP on the APs.

http://community.cambiumnetworks.com/t5/cnPilot-E-Series-Enterprise-APs/How-to-configure-DHCP-Pool-to-give-IP-address-to-the-connected/m-p/61775

#6

thanks, does that setting make it pick INTERNET directly from the ISP?

@Gupta-Bobby wrote:

Refer to following link to enable DHCP on the APs.

http://community.cambiumnetworks.com/t5/cnPilot-E-Series-Enterprise-APs/How-to-configure-DHCP-Pool-to-give-IP-address-to-the-connected/m-p/61775

#7

You should review the cnPilot Enterprise AP User Guide 3.10. The instructions for setting up NAT are on page 101.

#8
@TimoWanume wrote:

thanks, does that setting make it pick INTERNET directly from the ISP?

@Gupta-Bobby wrote:

Refer to following link to enable DHCP on the APs.

http://community.cambiumnetworks.com/t5/cnPilot-E-Series-Enterprise-APs/How-to-configure-DHCP-Pool-to-give-IP-address-to-the-connected/m-p/61775

How do i add these ISP setteings in cnPilot E500?

Kindly help