Hi, Im using xv2-2t0 during config i have config a DHCP pool and everything seems to be configured correctly but when i try to get my laptop or mobile connected to AP it stucks on obtaining IP address and then tries again and again. Can someone help me with a solution please
Can someone help me getting the issue resolved. Im trying a very simple thing by extending my internet through this AP. I have config a DHCP pool of 50 IPs from 192.168.10.10 - 192.168.10.60. I have set the gateway to 192.168.10.1 and network is at 192.168.10.0/24. But still not getting any IP address pool rather im getting an IP address of 169.254.x.x. Need help
Hi @Farrukh_Raza and welcome to the Cambium Community. Please email me a tech-support log for an AP with this configuration to gary.hansen@cambiumnetworks.com. Also, are you trying to do NAT or just the DHCP Pool? Secondly, what VLAN ID is used by the 192.168.10.0/24 network? If you have not created an L3 interface for the VLAN, then you will need to do so.