Is it possible to send a script or command to disabled WMWI serv (voice mail notifications rings) and add an ACS server address remotly by using CN maestro?
Please see below commands to disabled WMWI serv (voice mail notifications rings) and add an ACS server address remotely by using CN maestro.
I have attached the UI screen captures with parameters and respective commands.
DBID_TR_MODULE_ENABLE=1
DBID_TR_ACS_URL=https://172.16.5.100
DBID_TR_ACS_USER_NAME=admin
DBID_TR_ACS_PWD=admin
DBID_SIP_VMWI_ENABLE=0 1 1 1 1 1 1 1
DBID_ENABLE_AUDIO_MB=0 1 1 1 1 1 1 1
Procedure to create configuration Profile for User-defined parameter.
- Goto Configure > Create Profile
- In the profile > Goto User-defined overrides section and paste above the command.
- VMWI_Serv.jpg (265 KB)
- ACS_SERVER_Configuration.jpg (232 KB)
Thank you! If we want to push our default config template remotly? Usually we upload the config file to router at the office before going out but how about downloading and seeing the scrip to push remotly?
Thanks for your help.
By entering the command into AP Group we have to associate a WLAN with it so it will wipe out the customer's current WLAN setting? Is there a way to push only the command and not changing anything else?
- Download tech support file from customer's device (Monitor->Toos->device id).
- Copy compete current configuration(exported config Part) from downloaded tech support file.
- In complete configuration file, change the value of commands as your per requirement.
- Push the complete configuration to the device as User-defined parameters.