My ePMP Hotspot 1000 2.4GHz really brick after upgrading from fw ver 3.3.1 to 3.5.5
Try reflash using above link
STEPS TAKEN:
-install tftp server
-download and extract firmware.bin from 3.3.1.tar.gz and put it into tftp-root
-set my pc ip to 192.168.1.10
-run tftp server with nic ip 192.168.1.10
-connect ethernet cable from Power Adapter LAN to my pc
-plug POE ethernet cable
-ePMP 1000 on but no progress bar on TFTP server
-try factory reset but still hang (led become amber and green)
How to solve this?
tq