e3K to e4K comparison with Cambium support

Folks,
We are looking for a network running 100% e3K AP/SMs to forklift the AP and share some before/after results.
We will be happy to provide a 4500AP and 20SMs as you also swap out some of the SMs and share before/after results from the AP and SMs perspective. Our team will work very closely with you to gather the test data.
Thank you

Sakid

7 Likes

Hi Sakid, we would be up for this. I have a e3k with 40 subs on it and would love to try the 4500 out.

1 Like

Are there any known issues with over 15-20 subs? We have other sites we can test that are at the 15-20 mark.

Lets correspond via email if you like. Send me a note at sakid.ahmed@cambiumnetworks.com please and lets take it from there.

Sakid

I have AP3000 + 36 F300-25 on 80mhz channel. In this location on this 90 degree azimuth I can switch even 30 more F300 (currently they are serviced by another AP3000). I would be happy to test mixed mode.

We have a customer that has about 15 3000 APs with all F300 SM. They have a few APs with 17 to 25 SM’s each.

Hi Sakid,
We have a couple of 3k Ap with 44 and 42 sm each. I’ve been waiting for an opportunity to test the new 4.5k
Cheers.

We have one particular 3000 AP with 16 clients on it that are mostly all within 2-3 KM, and who are a community of heavy users. It’s also an area we could easily connect all 20, and could also migrate some clients from other APs on that same tower, to scale up to 30-40 reasonably easily, again mostly all close in with good signals.

Hi,
I would like to engage with you and have my team start working with you. Can we connect via email or whatsapp? Where are you located? Please email me at sakid.ahmed@cambiumnetworks.com

Sakid

Please send me an email at sakid.ahmed@cambiumnetworks.com. Where are you located?

Hi, we are at Manly, NSW, Au.

I have sent you an email also.

Hello, sorry for the late answer, we will be happy to make test for 4500 line, as we are considering 4500 and 4600 upgrades in our Network, but reading the post on forum we are worried about pps throughput problem with 20+ customers like it was with epmp3000 line. We do have 90 % of our network (30+ AP) running on ePMP3000 version with SM Force300 only. On ours AP we do have different numbers of SM like ~ 5,10,15,20,30,40,45 and we are using 40 Mhz and 80 Mhz wide channels. We successfully running 200 Mbps packets in clear areas, but mostly selling 100 Mbps for our customers. So we have very wide spectrum for test. Also we was consulting many cases with Sebestia Opiela (Cambium), also shared some important leads regarding epmp3000 line. We are in Canary Islands - Tenerife, Best Regards Ziemowit