Elevate on Mikrotik

Products ePMP
1

Greetings,

I urgently need to have a solid answer on the stability on the Mikrotik SMs below on the elevate  to ePMP 2000 APs.

RBSXTsq5nD

RBDisc-5nD

RBSXT5nDr2

Many thanks

2 Likes
2

I have forwarded this to our development team

1 Like
3

We wait for this also.

1 Like
4
@Pa1 wrote:

Greetings,

I urgently need to have a solid answer on the stability on the Mikrotik SMs below on the elevate  to ePMP 2000 APs.

RBSXTsq5nD

RBDisc-5nD

RBSXT5nDr2

Many thanks

These modesl are not currently planned for Elevate support. 

2 Likes
5

and what are they on? only what is sxt5 lite and it does not work in version 3.5.2 all (console commands needed)

1 Like
6

amigo segue link modo mais simples.

https://youtu.be/G90VU-RPhjc

7

cannot install wireles configuration for sxt elevate 4.3.2.1. Downgrade to 3.5.2, change configuration and upgrade to 4.3.2.1 works

8

https://community.cambiumnetworks.com/t5/ePMP-3000-2000-and-1000/how-to-find-out-if-the-radio-is-epmp-1000-or-2000-per-snmp/m-p/106893#M17089

MIB :

140 - ePMP Elevate SXTLITE5 BOARD
			141 - ePMP Elevate COMFAST BOARD
			142 - ePMP Elevate LHG5 BOARD
			143 - ePMP Elevate Disc Lite BOARD
			145 - ePMP Elevate Sextant BOARD
1 Like
9

Sorry we are interested in being able to operate with elevate with mikrotik RB SXT 5HPnD r2 equipment, but apparently these models are not yet supported, as we have about 4000 CPEs and we would start working in a hybrid way with the epmp200.
Awaiting a prompt response.
thanks

10

RB SXT 5HPnD r2 works same as SXT LITE 5. I have many elevated RB SXT 5HPnD r2.

11

thanks for the information ... it is necessary that the mikrotik CPE is in some specific firmware ??? some manual how to raise elevate these teams

12

Hi,

To elevate with Device Elevator (with cable or over the air), MT software running on devices MUST BE 6.40.x

Please take a look at the following community post:

https://community.cambiumnetworks.com/t5/ePMP-Elevate/Device-Elevator-a-powerful-tool-for-your-network-lifting/td-p/75871

Thanks,

Dmitry

13

saludos, como se hace el proceso para mikrotik? solo se en ubiquiti

1 Like