Release 6.6.1 is a maintenance release of Release 6.6 with new features, enhancements, and bug fixes.
Firmware
New features, enhancements
- WIDS/WIPS enhancements
- ePSK support for WPA3
- MarketApps
Fixed issues
| Tracking ID | Platform | Description |
|---|---|---|
| FLCN-16335 | All | The switch deleted the PBA policy and immediately added it back with in a second because the APs were not sending LLDP frames at regular intervals of 30 seconds. |
| FLCN-15279 | XV2-22H | The 802.1X port-based authentication feature configuration was not applied on the AP. |
| FLCN-15116 | All | Techsupport upload was failing when IPv6 addresses were resolved first and were not reachable. |
| FLCN-14950 | All | APs were sending MAC address to the cnMatrix switch instead of the hostname in the LLDP message. |
| FLCN-14905 | All | AP restarted frequently because of low memory when the internal DHCP pool address range was high. |
| FLCN-14781 | All | For Australia regulatory, APs were unable to set maximum transmit power in AUTO mode when static channel was configured. |
| FLCN-14743 | All | Client was assigned a WLAN VLAN after roaming in a VLAN that was dynamically assigned after a successful RADIUS MAC authentication. |
| FLCN-14636 | All | APs were unresponsive even when drawing power and the radios were beaconing. Restarting the APs through PoE recovered the AP. |
| FLCN-14296 | All | One random MAC address was generated for every unique successful client connection to the device. |
| FLCN-11796 | All | Session Time/Rate Limit returned by the RADIUS server was not maintained across roaming for a WPA2-Enterprise client. |
| FLCN-11353 | All | FT roaming with WPA3-SAE was failing, when a client, after successful WPA3 FT roaming between two APs (AP1 and AP2), disconnected from AP1 and then created a new connection to AP1 and tried to roam to AP2. |
For more details regarding new features, enhancements, bug-fixes, and known issues, please refer Documentation / Cambium Networks Support