Release 7.1 is targeted specifically for XV2-22H, XV2-21X, and XV2-23T platforms, with enhancements and bug fixes.
(https://support.cambiumnetworks.com/files/wifi6_xv22h_2_21x_2_/)
Firmware
Enhancements
| Jira ID | Summary |
|---|---|
| FLCN-17930 | SNMP trap server maximum character count is increased to 39 to support full IPv6 address |
| FLCN-17865 | The WIFI6-SPOOFED-ARP-DETECTED spoofed ARP event message now includes the actual IP address of the client as part of the message |
| FLCN-17656 | APs now display the IPv6 address of wired clients |
| FLCN-17301 | PER field is available in the output of the show wireless clients statistics command |
| FLCN-16913 | The security type negotiated by the client is available in the output of the show wireless clients command |
| FLCN-16063 | Disable AP’s USB port by executing the no usb command |
| FLCN-11023 | Custom COA port can now be configured using the coa-port command |
Fixed Issues
| Jira ID | Summary |
|---|---|
| FLCN-18057 | AP continuously restarted resulting in cnMaestro not displaying Wi-Fi events |
| FLCN-17886 | After upgrading APs, clients reported the IP address assigned by the AP as Bad IP Address resulting in the depletion of addresses in the DHCP IP pool |
| FLCN-17529 | Wireless client data reports updated the association time of wireless clients to the current AP time |
| FLCN-17281 | A DHCP failure event was triggered with the error message—Client VLAN is not mapped on interface—even though the port is configured to allow all VLANs |
| FLCN-17083 | mDNS query packets were forwarded to Ethernet port, which was used as uplink, when Bonjour services was enabled |
| FLCN-17080 | APs received multiple spoof ARP events where both client MAC and spoofed MAC addresses were the same |
| FLCN-16999 | Unable to obtain SSH, management, and UI access to APs when turned on through the Ethernet2 interface (as WAN connection) if the management access is configured as allowed wired only |
| FLCN-16943 | Wireless clients failed to obtain an IP address from the uplink immediately after AP restart if VLANs are not yet installed on the cnMatrix switch |
| FLCN-16579 | The AP working as a mesh client intermittently broke the mesh connection affecting the network access of clients. The issue occurred only when AP operated in the DFS channels |
| FLCN-16571 | APs were sending ARP messages to other APs, leading to ARP flooding in networks |
| FLCN-16376 | AP incorrectly reported client disconnection reason as channel change even though disconnection was because of MAC authentication reject |
| FLCN-16377 | The nslookup command now works and displays information |
| FLCN-16141 | RADIUS attributes were not updated in the output of “show wireless clients user-group” command and the details are not populated in cnMaestro |
| FLCN-16072 | Switching from mesh client to the base fails when mesh auto-detect backhaul is enabled and the Ethernet link changes from down to the up state |
| FLCN-15917 | Mesh configuration in 2.4 GHz radio now works in the Democratic Republic of the Congo |
| FLCN-15524 | Invalid PMKID failure was occurring when multiple clients were involved in FT roaming across APs |
| FLCN-15116 | Techsupport upload was failing when IPv6 addresses were resolved first and were not reachable |
| FLCN-14290 | Client disconnect reports and events were not generated for the failure cases—session timeout and quota exhausted—when cnMaestro captive portal is configured |
| FLCN-13239 | Auto-VLAN now supports 200 VLANs when Ethernet1 interface is configured as Trunk mode |
| FLCN-13122 | Honeypot AP was not detected when SSID was hidden |
