ePMP 1000 force F/W problem

Products ePMP
1

During firmware upgrading  by mistake the power plug  gose out 

the ePMP 1000 now rebooting 

anyone can help

2

Hi,

Please take a look at the following article:

http://community.cambiumnetworks.com/t5/ePMP-Troubleshooting/Recovery-of-flash-corrupted-ePMP-devices-caused-due-to-power/m-p/54712

It should help to recover the firmware.

Thanks,
Dmitry

3

Hi Thanks, Dmitry

from where i can Download ePMP-NonGPS_Synced-v2.6.2.tar.gz

in  Combium website only  old one is ePMP-NonGPS_Synced-v4.4.1.tar.gz

Best Regrds 

4
@Vlppro wrote:

Hi Thanks, Dmitry

from where i can Download ePMP-NonGPS_Synced-v2.6.2.tar.gz

in  Combium website only  old one is ePMP-NonGPS_Synced-v4.4.1.tar.gz

Best Regrds 

You can find it in the ePMP Archive.

5

Hi Dear from both network MAIN and AUX we cant get the IP Dufolut IP 192.168.0.2 or 192.168.1.2

No IP we get 

nad we Tried  put 192.168.1.10 and 192.168.0.10  inthe TFTP Server stil not working 

both MAIN and AUX  port working and flashing  and we see the ebooting by network prot in my PC flashing 

put not get IP 

6

Have you tried using the fallback IP of 169.254.1.1?

7

yes I was Tried Too 

8

I think at this point you should open up a support ticket with Cambium.