ePMP 1000 Update error

[Fedor]

Please try to recover it via TFTP.
Please see the following for details:

Recovery of flash corrupted 802.11n-based ePMP devices caused due to power interruption during a software upgrade

This topic describes the recovery procedure for ePMP1000/F180/F200/F190 devices. For ePMP3000, ePMP3000L, ePMP 3000MP and F300 devices, please see this newer article. Problem Statement: All ePMP radios, except the Connectorized Radios with Sync, have a single flash bank. There is a high probability that the flash bank can get corrupted when power to the radio is interrupted during a flash write, i.e. software upgrade. This is not an issue with the Sync radio since there are two flash banks i…

Thank you.